ASUS RAMPAGE V EXTREME/U3.1 Intel USB 3.0 Driver 3.0.1.41 for Windows 7 Download

Posted at May 5, 2024 by PCI-DB Team

ASUS RAMPAGE V EXTREME/U3.1 Intel USB 3.0 Driver 3.0.1.41 for Windows 7 Description

ASUS RAMPAGE V EXTREME/U3.1 Specifications:

CPU:
- Intel Socket 2011-v3 Core i7 Processors
- Supports Intel 22 nm CPU
- Supports Intel Turbo Boost Technology 2.0
The Intel Turbo Boost Technology 2.0 support depends on the CPU types.

Chipset:
- Intel X99

Memory:
- 8 x DIMM, Max. 64GB, DDR4 3300(O.C.)/3000(O.C.)/2800(O.C.)/2666(O.C.)/2400(O.C.)/2133 MHz Non-ECC, Un-buffered Memory
- Quad Channel Memory Architecture
- Supports Intel Extreme Memory Profile (XMP)
- Hyper DIMM support is subject to the physical characteristics of individual CPUs.

Multi-GPU Support:
- Supports NVIDIA 4-Way SLI Technology
- Supports NVIDIA 3-Way SLI Technology
- Supports NVIDIA SLI Technology
- Supports AMD 4-Way CrossFireX Technology
- Supports AMD 3-Way CrossFireX Technology
- Supports AMD CrossFireX Technology

Expansion Slots:
- 4 x PCIe 3.0/2.0 x16 (x16, x16/x16, x16/x8/x8 or x16/x8/x8/x8 mode with 40-LANE CPU; x16, x16/x8, x8/x8/x8 mode with 28-LANE CPU)
- 1 x PCIe 2.0 x16 (x4 mode)
- 1 x PCIe 2.0 x1

Storage:
- New Intel Core i7 Processors :
1 x M.2 Socket 3, , with M Key, type 2260/2280/22110 storage devices support ( Supports PCIE SSDs only)
- Intel X99 chipset :
1 x SATA Express port, red, compatible with 2 x SATA 6.0 Gb/s ports
8 x SATA 6Gb/s port(s), red
Supports Intel Smart Response Technology, Intel Rapid Recovery Technology
- ASMedia SATA Express controller :
1 x SATA Express port, red, compatible with 2 x SATA 6.0 Gb/s ports

LAN:
- Intel I218V, 1 x Gigabit LAN Controller(s), featuring GAMEFIRST III
- Intel LAN- Dual interconnect between the Integrated LAN controller and Physical Layer (PHY)
- Anti-surge LANGuard

Wireless Data Network:
- Wi-Fi 802.11a/b/g/n/ac
- Supports dual band frequency 2.4/5 GHz
- Up to 1300Mbps transfer speed

Bluetooth:
- Bluetooth V4.0

Audio:
- ROG SupremeFX 8-Channel High Definition Audio CODEC
Supports : Jack-detection, Multi-streaming, Front Panel Jack-retasking
SupremeFX Shielding Technology
ELNA premium audio capacitors

USB Ports:
- Intel X99 chipset
4 x USB 3.0 port(s) (4 at mid-board)
- Intel X99 chipset
6 x USB 2.0 port(s) (2 at back panel, black, 4 at mid-board)
- ASMedia USB 3.0 controller
10 x USB 3.0 port(s) (10 at back panel, blue)

OC Panel:
2.6 " LCM display
EXTREME/NORMAL mode switch
- EXTREME Mode for subzero OC benching
VGA Hotwire
Subzero Sense
Slow Mode
Pause Switch
VGA SMB header
ProbeIt
4 x 4-pin extra fan connectors

- NORMAL Mode for in-chassis usage
CPU Level Up OC button
FanSpeed control button
LCM backlight on/off button
- I/O Ports
POWER:1 x SATA power connector
ROG_EXT port:1 x 18-1 pin data connection port

Back I/O Ports:

- 1 x PS/2 keyboard/mouse combo port(s)
- 1 x LAN (RJ45) port(s)
- 10 x USB 3.0 (blue)
- 2 x USB 2.0 (one port can be switched to ROG Connect)
- 1 x Optical S/PDIF out
- 5 x Audio jack(s)
- 1 x Clear CMOS button(s)
- 1 x ROG Connect On/ Off switch(es)
- 1 x ASUS Wi-Fi GO! module (Wi-Fi 802.11 a/b/g/n/ac and Bluetooth v4.0

Internal I/O Ports:
- 2 x USB 3.0 connector(s) support(s) additional 4 USB 3.0 port(s)
- 2 x USB 2.0 connector(s) support(s) additional 4 USB 2.0 port(s)
- 2 x SATA Express connector: red, with M key, type 2242/2260/2280 storage devices support (both SATA & PCIE mode)
- 1 x M.2 Socket 3 for M Key, type 2260/2280/22110 storage devices support ( Support PCIE SSD only)
- 1 x TPM header
- 8 x SATA 6Gb/s connector(s)
- 1 x CPU Fan connector(s) (1 x 4 -pin)
- 1 x CPU OPT Fan connector(s) (1 x 4 -pin)
- 6 x Chassis Fan connector(s) (6 x 4 -pin)
- 1 x Thunderbolt header(s)
- 1 x 24-pin EATX Power connector(s)
- 1 x 8-pin ATX 12V Power connector(s)
- 1 x 4-pin ATX 12V Power connector(s)
- 1 x Front panel audio connector(s) (AAFP)
- 1 x System panel(s) (Q-Connector)
- 1 x MemOK! button(s)
- 1 x Slow Mode switch(es)
- 9 x ProbeIt Measurement Points
- 3 x Thermal sensor connector(s)
- 1 x EZ Plug connector(s) (4-pin Molex power connector)
- 1 x Power-on button(s)
- 1 x Reset button(s)
- 1 x BIOS Switch button(s)
- 1 x LN2 Mode jumper(s)
- 1 x ROG extension (ROG_EXT) header(s)
- 1 x KeyBot Button
- 1 x Sonic SoundStage Button
- 1 x Safe Boot button
- 1 x ReTry button

BIOS:
- 2 x 128 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI2.7, WfM2.0, SM BIOS 2.8, ACPI 5.0, Multi-language BIOS, ASUS EZ Flash 2, CrashFree BIOS 3, F11 EZ Tuning Wizard, F6 Qfan Control, F3 My Favorites, Quick Note, Last Modified log, F12 PrintScreen, F3 Shortcut functions and ASUS DRAM SPD (Serial Presence Detect) memory information.

Manageability:
- WfM2.0, DMI2.7, WOL by PME, PXE

Form Factor:
- Extended ATX Form Factor
- 12 inch x 10.7 inch ( 30.5 cm x 27.2 cm )

Installation:

1. Locate the hard drive directory where the driver files are stored with the browser or the explore feature of  Windows.
2. Double click the “Setup.exe” from this directory.
3. The Install dialog will appear.
4. Click “Next” to continue.
5. Read License Agreement and click “Yes” to proceed.
6. Review Readme file Information and click “Next” to proceed.
7. When the “Setup Progress” is complete click “Next” to proceed.
8. Lastly, the “Setup Complete” screen appears so click “Finish” to restart your computer.

About USB Driver:

Windows operating systems automatically apply a generic driver that allows users to transfer files using the USB (Universal Serial Bus) port; however, installing the appropriate software can bring about significant changes.

If the proper USB software is installed, systems will benefit from improved compatibility with different devices, numerous fixes regarding USB issues, and various other changes that can increase transfer speed with external storage drives.

When it comes to the installation steps, simply check to make sure that the download record is compatible with your system characteristics, get the package, run the setup, and follow the on-screen instructions for a complete update.

Bear in mind that even though other OSes might be compatible, it would be best if you applied this package only on specified platforms. In addition to that, as technology evolves from one day to another, we recommended that you always use the latest software available.

That being said, click the download button, get and apply the present version and enjoy your newly updated system. Also, constantly check back with our website to find out when a new version is available.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers