PCI-DB.com
  1. Driver
  2. Motherboard
  3. ASUS RAMPAGE V EXTREME/U3.1 Intel MEI Driver 10.0.0.1204

ASUS RAMPAGE V EXTREME/U3.1 Intel MEI Driver 10.0.0.1204 Download

Posted at December 23, 2024 by PCI-DB Team

Install Driver Automatically
Device NameASUS RAMPAGE V EXTREME/U3.1 Intel MEI Driver 10.0.0.1204
CategoryMotherboard
ManufacturerIntel
File Size78.1 MB
Supported OSWindows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows 8.1 ,Windows 8.1 64 bit

ASUS RAMPAGE V EXTREME/U3.1 Intel MEI Driver 10.0.0.1204 Description

ASUS RAMPAGE V EXTREME/U3.1 Specifications:

CPU:
- Intel Socket 2011-v3 Core i7 Processors
- Supports Intel 22 nm CPU
- Supports Intel Turbo Boost Technology 2.0
The Intel Turbo Boost Technology 2.0 support depends on the CPU types.

Chipset:
- Intel X99

Memory:
- 8 x DIMM, Max. 64GB, DDR4 3300(O.C.)/3000(O.C.)/2800(O.C.)/2666(O.C.)/2400(O.C.)/2133 MHz Non-ECC, Un-buffered Memory
- Quad Channel Memory Architecture
- Supports Intel Extreme Memory Profile (XMP)
- Hyper DIMM support is subject to the physical characteristics of individual CPUs.

Multi-GPU Support:
- Supports NVIDIA 4-Way SLI Technology
- Supports NVIDIA 3-Way SLI Technology
- Supports NVIDIA SLI Technology
- Supports AMD 4-Way CrossFireX Technology
- Supports AMD 3-Way CrossFireX Technology
- Supports AMD CrossFireX Technology

Expansion Slots:
- 4 x PCIe 3.0/2.0 x16 (x16, x16/x16, x16/x8/x8 or x16/x8/x8/x8 mode with 40-LANE CPU; x16, x16/x8, x8/x8/x8 mode with 28-LANE CPU)
- 1 x PCIe 2.0 x16 (x4 mode)
- 1 x PCIe 2.0 x1

Storage:
- New Intel Core i7 Processors :
1 x M.2 Socket 3, , with M Key, type 2260/2280/22110 storage devices support ( Supports PCIE SSDs only)
- Intel X99 chipset :
1 x SATA Express port, red, compatible with 2 x SATA 6.0 Gb/s ports
8 x SATA 6Gb/s port(s), red
Supports Intel Smart Response Technology, Intel Rapid Recovery Technology
- ASMedia SATA Express controller :
1 x SATA Express port, red, compatible with 2 x SATA 6.0 Gb/s ports

LAN:
- Intel I218V, 1 x Gigabit LAN Controller(s), featuring GAMEFIRST III
- Intel LAN- Dual interconnect between the Integrated LAN controller and Physical Layer (PHY)
- Anti-surge LANGuard

Wireless Data Network:
- Wi-Fi 802.11a/b/g/n/ac
- Supports dual band frequency 2.4/5 GHz
- Up to 1300Mbps transfer speed

Bluetooth:
- Bluetooth V4.0

Audio:
- ROG SupremeFX 8-Channel High Definition Audio CODEC
Supports : Jack-detection, Multi-streaming, Front Panel Jack-retasking
SupremeFX Shielding Technology
ELNA premium audio capacitors

USB Ports:
- Intel X99 chipset
4 x USB 3.0 port(s) (4 at mid-board)
- Intel X99 chipset
6 x USB 2.0 port(s) (2 at back panel, black, 4 at mid-board)
- ASMedia USB 3.0 controller
10 x USB 3.0 port(s) (10 at back panel, blue)

OC Panel:
2.6 " LCM display
EXTREME/NORMAL mode switch
- EXTREME Mode for subzero OC benching
VGA Hotwire
Subzero Sense
Slow Mode
Pause Switch
VGA SMB header
ProbeIt
4 x 4-pin extra fan connectors

- NORMAL Mode for in-chassis usage
CPU Level Up OC button
FanSpeed control button
LCM backlight on/off button
- I/O Ports
POWER:1 x SATA power connector
ROG_EXT port:1 x 18-1 pin data connection port

Back I/O Ports:

- 1 x PS/2 keyboard/mouse combo port(s)
- 1 x LAN (RJ45) port(s)
- 10 x USB 3.0 (blue)
- 2 x USB 2.0 (one port can be switched to ROG Connect)
- 1 x Optical S/PDIF out
- 5 x Audio jack(s)
- 1 x Clear CMOS button(s)
- 1 x ROG Connect On/ Off switch(es)
- 1 x ASUS Wi-Fi GO! module (Wi-Fi 802.11 a/b/g/n/ac and Bluetooth v4.0

Internal I/O Ports:
- 2 x USB 3.0 connector(s) support(s) additional 4 USB 3.0 port(s)
- 2 x USB 2.0 connector(s) support(s) additional 4 USB 2.0 port(s)
- 2 x SATA Express connector: red, with M key, type 2242/2260/2280 storage devices support (both SATA & PCIE mode)
- 1 x M.2 Socket 3 for M Key, type 2260/2280/22110 storage devices support ( Support PCIE SSD only)
- 1 x TPM header
- 8 x SATA 6Gb/s connector(s)
- 1 x CPU Fan connector(s) (1 x 4 -pin)
- 1 x CPU OPT Fan connector(s) (1 x 4 -pin)
- 6 x Chassis Fan connector(s) (6 x 4 -pin)
- 1 x Thunderbolt header(s)
- 1 x 24-pin EATX Power connector(s)
- 1 x 8-pin ATX 12V Power connector(s)
- 1 x 4-pin ATX 12V Power connector(s)
- 1 x Front panel audio connector(s) (AAFP)
- 1 x System panel(s) (Q-Connector)
- 1 x MemOK! button(s)
- 1 x Slow Mode switch(es)
- 9 x ProbeIt Measurement Points
- 3 x Thermal sensor connector(s)
- 1 x EZ Plug connector(s) (4-pin Molex power connector)
- 1 x Power-on button(s)
- 1 x Reset button(s)
- 1 x BIOS Switch button(s)
- 1 x LN2 Mode jumper(s)
- 1 x ROG extension (ROG_EXT) header(s)
- 1 x KeyBot Button
- 1 x Sonic SoundStage Button
- 1 x Safe Boot button
- 1 x ReTry button

BIOS:
- 2 x 128 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI2.7, WfM2.0, SM BIOS 2.8, ACPI 5.0, Multi-language BIOS, ASUS EZ Flash 2, CrashFree BIOS 3, F11 EZ Tuning Wizard, F6 Qfan Control, F3 My Favorites, Quick Note, Last Modified log, F12 PrintScreen, F3 Shortcut functions and ASUS DRAM SPD (Serial Presence Detect) memory information.

Manageability:
- WfM2.0, DMI2.7, WOL by PME, PXE

Form Factor:
- Extended ATX Form Factor
- 12 inch x 10.7 inch ( 30.5 cm x 27.2 cm )

About ME Driver:

The Management Engine feature enables computers to make use of various technologies such as AMT or power management. Installing appropriate drivers allows compatible systems to benefit from this feature embedded in the CPU chipset.

By updating this software to a newer version, you get various stability improvements, enhanced compatibility with different components, and even added support for new technologies.

To benefit from all these, make sure that the download record is suitable for your system characteristics, get the package, run the setup, and follow the on-screen instructions for a complete installation. Also, don’t forget to perform a reboot so that all changes take effect.

Bear in mind that, even though other platforms might be compatible as well, we do not recommend applying this release on operating systems other than the highlighted ones.

That being said, if you intend to apply this ME release, click the download button and install the package. Don’t forget to check back with our website as often as possible so that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers

Find Missing Drivers

© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.