MikroTik RouterOS SMIPS Firmware 6.41.1 Download

Posted at November 19, 2024 by PCI-DB Team

MikroTik RouterOS SMIPS Firmware 6.41.1 Description

What's new in 6.41.1:

- bridge - fixed "mst-override" export;
- bridge - fixed allowed MSTI priority values;
- bridge - fixed ARP option changing on bridge (introduced v6.41);
- bridge - fixed hw-offload disabling for Mediatek and Realtek switches when STP/RSTP configured;
- bridge - fixed hw-offload disabling when adding a port with "horizon" set;
- bridge - fixed IGMP Snooping after disabling/enabling bridge;
- bridge - fixed interface list moving in "/interface bridge port" menu;
- bridge - fixed repetitive port "priority" set;
- bridge - fixed situation when packet could be sent with local MAC as dst-mac;
- bridge - fixed VLAN filtering when "use-ip-firewall" is enabled (introduced in v6.41);
- bridge - properly update "actual-mtu" after MTU value changes (introduced v6.41);
- btest - fixed TCP test accuracy when low TX/RX rates are used;
- certificate - do not use utf8 for SCEP challenge password;
- certificate - fixed PKCS#10 version;
- crs317 - improved transmit performance between 10G and 1G ports;
- crs326 - fixed possible packet leaking from CPU to switch ports;
- crs3xx - hide deprecated VLAN related settings in "/interface ethernet switch port" menu;
- detnet - additional work on "detect-internet" implementation;
- dhcpv4-server - fixed framed and classless route received from RADIUS server;
- discovery - fixed discovery related settings conversation during upgrade from pre-v6.41 discovery implementation (introduced v6.41);
- dude - fixed e-mail notifications when default port is not used;
- firewall - fixed "tls-host" firewall feature (introduced v6.41);
- firewall - limited maximum "address-list-timeout" value to 35w3d13h13m56s;
- ike1 - fixed "aes-ctr" and "aes-gcm" encryption algorithms (introduced v6.41);
- ike2 - delay rekeyed peer outbound SA installation;
- ike2 - improve half-open connection handling;
- ipsec - properly update IPsec secret for IPIP/EoIP/GRE dynamic peer;
- log - properly report bridge interface MAC address changes;
- netinstall - improved LTE package description;
- netinstall - properly generate skins folder when branding package is installed;
- ovpn - fixed resource leak on systems with high CPU usage;
- ppp - changed default value of "route-distance" to 1;
- ppp - fixed change-mss functionality in some specific traffic (introduced in v6.41);
- radius - added warning if PPP authentication over RADIUS is enabled;
- radius - increase allowed RADIUS server timeout to 60s;
- rb1100ahx4 - fixed reset button responsiveness when regular firmware is used;
- rb433/rb450 - fixed port flapping on bridged Ethernet interfaces if hw-offload is enabled (introduced in v6.41);
- routerboot - fixed missing upgrade firmware for "ar7240" devices;
- sfp - improved SFP module compatibility;
- snmp - allow also IPv6 on default public community;
- tile - fixed USB device speed detection after reboot;
- traffic-flow - do not count single extra packet per each flow;
- webfig - added support for proper default policies when adding script or scheduler job;
- webfig - fixed bridge port sorting order by name;
- webfig - fixed MAC address ordering;
- webfig - fixed wireless snooper address, SSID and other column ordering;
- winbox - added "dhcp-option-set" to DHCP server;
- winbox - allow to specify "to-ports" for "action=masquerade";
- winbox - do not show "hw" option on non-Ethernet interfaces;
- winbox - do not show VLAN related settings in switch port menu on CRS3xx boards;
- wireless - updated "Czech Republic" country 5.8 GHz frequency range;

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn't either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn't be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don't always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you're looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don't power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don't miss the update that will improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related MikroTik Drivers