ASRock H61M-VG4 ITE CIR Driver 2.5.1003 Download

Posted at November 2, 2024 by PCI-DB Team

ASRock H61M-VG4 ITE CIR Driver 2.5.1003 Description

Specifications:

CPU:
- Supports 3rd and 2nd Generation Intel Core i7 / i5 / i3 / Xeon / Pentium / Celeron in LGA1155 Package
- Supports Intel Turbo Boost 2.0 Technology
- Supports Intel K-Series CPU
- Supports Hyper-Threading Technology

Chipset:

- Intel H61
- Supports Intel Rapid Start Technology and Smart Connect Technology

Memory:

- Dual Channel DDR3 memory technology
- 2 x DDR3 DIMM slots
- Supports DDR3 1600/1333/1066 non-ECC, un-buffered memory
- Max. capacity of system memory: 16GB
- Supports Intel Extreme Memory Profile (XMP) 1.3 / 1.2 with Intel Ivy Bridge CPU

Graphics:

- Supports Intel HD Graphics Built-in Visuals : Intel Quick Sync Video 2.0, Intel InTru 3D, Intel Clear Video HD Technology, Intel Insider, Intel HD Graphics 2500/4000 with Intel Ivy Bridge CPU
- Supports Intel HD Graphics Built-in Visuals : Intel Quick Sync Video, Intel InTru 3D, Intel Clear Video HD Technology, Intel HD Graphics 2000/3000, Intel Advanced Vector Extensions (AVX) with Intel Sandy Bridge CPU
- Pixel Shader 5.0, DirectX 11 with Intel Ivy Bridge CPU. Pixel Shader 4.1, DirectX 10.1 with Intel Sandy Bridge CPU.
- Max. shared memory 1760MB with Intel Ivy Bridge CPU. Max. shared memory 1759MB with Intel Sandy Bridge CPU.
- Supports D-Sub with max. resolution up to 2048x1536 @ 75Hz

Audio:

- 5.1 CH HD Audio (Realtek ALC662 Audio Codec)

LAN:

- PCIE x1 Gigabit LAN 10/100/1000 Mb/s
- Realtek RTL8111E
- Supports Wake-On-LAN
- Supports LAN Cable Detection
- Supports Energy Efficient Ethernet 802.3az
- Supports PXE

Slots:

- 1 x PCI Express 3.0 x16 slot (blue @ x16 mode)
- 1 x PCI Express 2.0 x1 slot

Storage:

- 4 x SATA2 3.0 Gb/s connectors, support NCQ, AHCI and Hot Plug functions

Connector:

- 1 x IR header
- 1 x Power LED header
- 1 x Chassis Intrusion header
- 1 x LPC/TPM header
- 1 x CPU Fan connector (4-pin)
- 1 x Chassis Fan connector (4-pin)
- 1 x 24 pin ATX power connector
- 1 x 4 pin 12V power connector
- 1 x Front panel audio connector
- 1 x SPDIF Out connector
- 2 x USB 2.0 headers (support 4 USB 2.0 ports)

Rear Panel I/O:

- 1 x PS/2 Mouse Port
- 1 x PS/2 Keyboard Port
- 1 x D-Sub Port
- 4 x USB 2.0 Ports
- 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED)
- HD Audio Jack: Line in / Front Speaker / Microphone

Hardware Monitor:

- CPU/Chassis Temperature Sensing
- CPU/Chassis Fan Tachometer
- CPU Quiet Fan (Allow Chassis Fan Speed Auto-Adjust by CPU Temperature)
- CPU/Chassis Fan Multi-Speed Control
- CASE OPEN detection
- Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore

Form Factor:

- Micro ATX Form Factor
- All Solid Capacitor design

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related ITE Drivers