ASRock 970A-G/3.1 AMD SATA RAID Driver 3.3.1540.28 Download

Posted at December 22, 2024 by PCI-DB Team

ASRock 970A-G/3.1 AMD SATA RAID Driver 3.3.1540.28 Description

Key Features:

- ASRock Super Alloy
- Supports Socket AM3+/AM3 processors
- Supports DDR3 2400+(OC)
- 2 PCIe 2.0 x16, 2 PCIe 2.0 x1, 1 PCI
- Supports AMD Quad CrossFireX
- 7.1 CH HD Audio (Realtek ALC1150 Audio Codec), ELNA Audio Caps & DTS Connect
- 6 SATA3, 1 M.2
- 2 USB 3.1 10Gb/s (1 Type-A + 1 Type-C), 4 USB 3.0 (2 Front, 2 Rear)
- Supports Full Spike Protection, ASRock Live Update & APP Shop

About SATA / AHCI / RAID Drivers:

When you install an operating system, SATA settings (be it AHCI, RAID, or IDE mode) are detected from the BIOS. If you want to change from one mode to another after the OS has been applied, appropriate drivers are required.

Bear in mind that if you modify these settings without installing proper files first, the operating system will not be able to boot until changes are reverted or required drivers are applied.

To perform the latter task, get the package, run the available setup and follow the instructions displayed on-screen for a complete installation. Afterwards, perform a system reboot so that all changes take effect, enter BIOS menu, and set the SATA option to the mode that best describes the newly applied drivers.

So, if you intend to modify the SATA settings to the mode described by this release, click the download button, and make the desired changes. In addition to that, don’t forget to constantly check with our website so that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related AMD Drivers