Aztech WL590E Repeater Firmware 314.106.1-013 Download

Posted at November 5, 2024 by PCI-DB Team

Aztech WL590E Repeater Firmware 314.106.1-013 Description

Upgrading your WL590E’s Firmware:

- On your Desktop / PC, launch any Web Browser (e.g. Intenet Explorer, Google Chrome) then type in 10.0.10.254 on its address bar to access the Web User Interface of your WL590E.
- On the Web User Interface, click on Device Admin > Firmware Upgrade. You will automatically be redirected to the firmware upgrade page of your WL590E.
- Click the Choose File button and locate the firmware upgrade file you have downloaded from the Aztech Support Site. You may then click the Apply button to confirm and start the firmware upgrade process.
NOTE : PLEASE PATIENTLY WAIT FOR THE FIRMWARE UPGRADE PROCESS TO FINISH. The firmware upgrade process would approximately take 3 minutes to complete. During the process, ensure that the LAN CABLE AND YOUR WL590E WOULD NOT BE UNPLUGGED.
- Once done, you would be redirected again to the Home page of your Web User Interface.
- To confirm if the firmware upgrade process is successful, click on Device Admin > Device Info. Check the Firmware Version.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Aztech Drivers