Intel MR 3108 ROC Hardware RAID Firmware 24.16.0-0082 Download

Posted at December 21, 2024 by PCI-DB Team

Intel MR 3108 ROC Hardware RAID Firmware 24.16.0-0082 Description

Firmware Package: 24.16.0-0082 (MR 6.12)

- Firmware 4.660.01.8103
- ROMENV 1.09
- BootBlock 3.07.00.00-0003
- NVDATA 3.1605.00-0009
- UEFI_Driver 0x06150500(signed)
- Hii 03.21.14.00(signed)
- FCODE 4.17.08.00
- BIOS 6.32.02.0
- Ctrl-R v5.17-1300
- PCLI 1.07.05

Bug Fixes and Enhancements:

- SCGCQ01159064: Firmware uses bad blocks for Cache Offload
- SCGCQ01048324: Handle passthrough and JBOD functionality for SDS Mode for iMR and MR with Invader and Intruder and Fury solutions

UEFI (EFI 2.0) instructions for updating RAID Firmware:

1. Download and extract all files to a local drive.
2. Boot the target system to EFI shell.
3. Change directory to the local drive and directory containing the flash update files and the firmware image file.
4. Type "update.nsh" or "eficmdtool2 -adpfwflash -f MR514p3.rom -noverchk -aall"
5. Wait for the flash to complete. Do NOT reboot the system during the update.

Windows and Linux instructions for updating RAID Firmware:

- The firmware update may be run from Within Windows or Linux using the appropriate versions of CmdTool2.
-In Windows, unzip the utility into the same directory as the rom file by typing "cmdtool2 -adpfwflash -f MR514p3.rom -aall".
-The Linux CmdTool2 by running the rpm and then calling the utility from /opt/MegaRAID/CmdTool2 as "./CmdTool2 -AdpFwFlash -f MR514p3.rom -aall"

DOS instructions for updating RAID Firmware:

1. Download and extract all files to a local drive.
2. Boot the target system to DOS.
3. Change directory to the local drive and directory containing the flash update files and the firmware image file.
4. Type "update.bat" or "doscmdtool2 -adpfwflash -f MR514p3.rom -aall"
5. Wait for the flash to complete. Do NOT reboot the system during the update.

This download is valid for the products listed below:

- Intel RAID Controller RS3DC080
- Intel RAID Controller RS3DC040
- Intel RAID Controller RS3MC044
- Intel RAID Controller RS3SC008
- Intel Integrated RAID Module RMS3CC080
- Intel Integrated RAID Module RMS3CC040

About SATA / AHCI / RAID Controllers:

When enabled by appropriate software, the SATA controller (RAID or AHCI) is properly recognized by the system and all of its features are made accessible.

In addition to that, the computer will have the ability to read all adapter characteristics, such as model and manufacturer, and will also be able to manage physical disk drives through the controller’s interface.

If you wish to apply this package, all you have to do is to make sure that the current release is compatible with both your adapter model and your operating system, and then to get the downloadable software. Extract it if necessary, run the available setup, and follow the on-screen instructions for a complete installation.

When finished, remember to perform a system reboot to make sure that all changes take effect properly. Please remember that, even though other OSes might also be compatible, we do not recommend installing this software on platforms other than the specified ones.

That being said, click the download button, get the package and apply it on your computer. Moreover, constantly check with our website to stay up to date with latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers