Gateway CX200 Texas Instruments Card Reader Driver 2.0.0.9 for Vista Download

Posted at May 10, 2024 by PCI-DB Team

Gateway CX200 Texas Instruments Card Reader Driver 2.0.0.9 for Vista Description

Specifications:

- CPU
Processor options One Mobile Intel Pentium M CPU
OR
One Intel Celeron M CPU
Processor packaging Intel socketable u-FCPGA
Level 2 cache 1 MB or 2 MB for Mobile Pentium
512 KB or 1 MB for Celeron M
Processor side bus speed 400/533 MHz

- BIOS
Phoenix BIOS
8 Mbit CMOS Boot Block Flash Memory
SMBIOS 2.3 support
Advanced Configuration and Power Interface 2.0 (ACPI 2.0) support
Wired for Management 2.0 (WfM 2.0)

- System memory
Memory type 533 MHz DDR2 RAM
Two 200-pin industry standard DDR2-SODIMM sockets, user accessible
2 GB maximum system memory

- Video
Graphics controller
ATI Mobility Radeon X600
OR
Mobile Intel 915GM/GMS, 910GML Express Chipset Family
Video memory Up to 128 MB Hyper memory (32/64 VRAM plus shared memory) for discrete (ATI M24C) architecture
Up to 64 MB UMA (shared memory) architecture with Dynamic Video Memory Technology (DVMT)
LCD display panel
14.0-inch active matrix (TFT) LCD color display

- Audio
Sound support
Conexant SmartAMC 3 Audio Modem Codec (AMC)
AC '97 Revision 2.3 Compliant
Internal speakers
Stereo speakers built into the front of notebook
1.0 W maximum output for each channel

- Communications
Modem features
56K v.92 modem
Uses the RJ-11 jack on the right side of the notebook
Supports Wake on Ring from S3 power mode
10/100/1000 Mbps Ethernet interface features
Integrated IEEE 802.3 (10/100/1000BASE-T) Gigabit Ethernet interface
Uses the RJ-45 jack on the left side of the notebook
Supports Wake on LAN from S3 power mode
Wireless Ethernet interface features (Factory installed option) Intel PRO/Wireless IEEE 802.11b/g network card embedded in the notebook
OR-
Intel PRO/Wireless IEEE802.11a/b/g network card embedded in the notebook

- Input/Output (I/O) ports
Three USB 2.0 (4-pin)
IEEE 1394 (4-pin)
V.92, 56K Modem (RJ-11)
10/100 Ethernet (RJ-45)
External monitor (VGA)
Stereo headphone output
Stereo microphone input
PC Card socket (one Type II)
DC input
Docking port
PCMCIA
Accepts one Type II device
TI PCI7411 controller
Note: This notebook does not support Zoom Video.
Docking solution
Type Cable Dock
Docking supported Cold dock

- Storage
Hard drive
Modular bays
One modular bay is available on the notebook. This bay may be used for a secondary battery, a CD drive, DVD/CD-RW drive, recordable DVD drive, a floppy disk drive, or a second hard drive. The modules are hot-swappable.

- Power
AC adapter 19 VDC, 3.5A, 65 W output
Automatically adjusts for 100 to 240 VAC, 50 to 60 Hz power sources
Battery type 8-cell Li-Ion 4.8 Ah 14.8 V nominal 75 Whr

- Security
Passwords
Power-on password (user/supervisor password set in BIOS)
Hard drive password
Physical
Main system memory compartment screws
Hard drive kit screw
Mini PCI bay screws
Kensington security slot on notebook back

- System management
SMBIOS 2.3 BIOS support
Advanced Configuration and Power Interface 2.0 (ACPI 2.0) support
Support for Wake on LAN from S3 power mode
Support for Intel LANDesk Client manager 6.0
Wired for Management 2.0 (WfM 2.0) enabled

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Texas Instruments Drivers