Posted at December 25, 2024 by PCI-DB Team
Install Driver AutomaticallyDevice Name | Grandstream GXV3240 IP Phone Firmware 1.0.3.158 Beta |
---|---|
Category | Voip Voice Over Ip |
Manufacturer | Grandstream |
File Size | 214.6 MB |
Supported OS | OS Independent |
- Updated phone to automatically answer paging call after a short reminding tone rather than a long one.
- Added Account -> Call settings -> Intercom barging.
- When "Intercom Barging" is enabled, if the current active call is an intercom call, the incoming intercom call will be automatically rejected; if the current active call is not an intercom call, the current active call will be put on hold and the incoming intercom call will be automatically answered. When "Intercom Barging" is disabled, a prompt will show up indicating the incoming intercom call without interrupting the current active call. The default setting is disabled. P-values for Account 1 to Account 6 are P26019, P26119, P26219, P26319, P26419 and P26519.
- Reduced audio delay.
- Added support for MJPEG video feed on outgoing call for Baudisch door system.
- Updated that preview function before answering the call would keep playing ringback on caller side.
- Added support ‘{‘, ‘}’ as valid character in Maintenance -> Contacts -> Download Server.
- Added “Constraint Mode” in Maintenance -> Upgrade -> Configuration via Keypad Menu. Users will need to input admin user password to configure Wireless & network and Advanced Settings.
- Added “Add to contacts” button in dial pad if input number does not match any in Contact.
- Added “Data Wiping” in LCD Settings -> Advanced settings to allow user to clean all configuration on the phone and reset P-values to default.
- Optimized the DTMF interval and duration control.
- Improved that changing syslog level does not need reboot to take effect.
- Supported SNI extension for TLS.
- Updated the default NTP server from “us.pool.ntp.org” to “pool.ntp.org”.
- Updated the default country code to ALL for PingAn OEM.
- Updated GXV3240 keypad event detection mechanism when upgrading via SD card.
- Fixed the 2.4G/5G Wi-Fi reversed issue after enabled.
- Fixed the Wi-Fi cannot be closed issue after enabled/disabled continually.
- Fixed the Wi-Fi scan and connect issue caused by the Wi-Fi chip for PingAn OEM
- Set parameter 'Power Management' to “off” to solve the AP6212 Wi-Fi delay issue.
- Fixed the incoming call can't be accepted or rejected in the CMCC IMS.
- Fixed DUT still uses random port after setting it to “No”.
- Fixed DUT has no audio when making a call to Broadsoft Announcement Center.
- Fixed DUT does not update BLF monitoring correctly.
- Fixed call park retrieval results in one-way audio on GenBand platform.
- Fixed DUT does not handle second call on door system correctly.
- Fixed DUT dials “***” will prompt “ip address format error” when set dialplan to {*+}.
- Fixed crash issue when dial plan pattern length is more than 20.
- Fixed tapping on programmable key more than once to dial DTMF after DUT ends a call to idle state.
- Fixed DUT fails to seize line for SCA mode on Broadsoft platform.
- Fixed conference URI uses Broadsoft sip server as domain rather than as configured.
- Fixed GXV3275 access voicemail does not display DTMF all the time.
- Fixed incoming Skype audio goes through handset even if default media channel is set to speaker.
- Fixed DUT dialplan does not apply to off-hook auto dial.
- Fixed RJ9 headset icon display issue when there is no headset plugged in.
Firmware updates for VoIP Phones are very important as they usually contain many bug fixes, add new features and updates, as well as add additional security features.
One of the main problems users come across when attempting to upgrade their VoIP Phone is that their device may be locked to a certain Carrier. Adding an unlocked version of the firmware may cause the device to stop working on certain networks. This operation may void your carrier warranty and, as such, is not recommended.
Before downloading, make sure that you have selected the appropriate firmware for your device and that the update supports the VoIP service provider you use.
Generally, it is important to upgrade older firmware in sequence (v1 to v2 to v3) and so on, because many manufacturers don’t launch standalone update packages.
Although using beta release firmware packages is tempting, it can prove to be quite risky as well. If you choose to try beta release updates, please read the detailed firmware notes and make sure that you have the possibility to revert to an older and more stable version in case the beta turns out faulty.
If you feel that this update can improve the functionality of your VoIP Phone, please use the download button and follow the installation instructions.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Device Type: Voip Voice Over Ip File Size: 78.7 MB OS Independent
Install DriverDevice Type: Voip Voice Over Ip File Size: 72.2 MB OS Independent
Install DriverDevice Type: Voip Voice Over Ip File Size: 78.7 MB OS Independent
Install DriverDevice Type: Voip Voice Over Ip File Size: 78.6 MB OS Independent
Install DriverDevice Type: Voip Voice Over Ip File Size: 78.7 MB OS Independent
Install DriverDevice Type: Voip Voice Over Ip File Size: 78.6 MB OS Independent
Install DriverDevice Type: Voip Voice Over Ip File Size: 78.6 MB OS Independent
Install DriverDevice Type: Voip Voice Over Ip File Size: 78.6 MB OS Independent
Install DriverDevice Type: Voip Voice Over Ip File Size: 78.7 MB OS Independent
Install DriverDevice Type: Voip Voice Over Ip File Size: 72.2 MB OS Independent
Install DriverFind Missing Drivers
Recent Devices
Recent Drivers
© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.