PCI-DB.com
  1. Driver
  2. Motherboard
  3. ASUS P8B75-V Intel Smart Connect Driver 4.2.40.2418 for Windows 8.1

ASUS P8B75-V Intel Smart Connect Driver 4.2.40.2418 for Windows 8.1 Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically
Device NameASUS P8B75-V Intel Smart Connect Driver 4.2.40.2418 for Windows 8.1
CategoryMotherboard
ManufacturerIntel
File Size22.1 MB
Supported OSWindows 8.1 ,Windows 8.1 64 bit

ASUS P8B75-V Intel Smart Connect Driver 4.2.40.2418 for Windows 8.1 Description

Specifications:

CPU:
- Intel Socket 1155 for 3rd/2nd Generation Core i7/Core i5/Core i3/Pentium/Celeron Processors
- Supports Intel 22 nm CPU
- Supports Intel 32 nm CPU
- Supports Intel Turbo Boost Technology 2.0

Chipset:

- Intel B75

Memory:

- 4 x DIMM, Max. 32GB, DDR3 2200(O.C.) / 2133(O.C.) / 2000(O.C.) / 1866(O.C.) / 1600 / 1333 / 1066 MHz Non-ECC, Un-buffered Memory
- Dual Channel Memory Architecture
- Supports Intel Extreme Memory Profile (XMP)

Graphics:

- Integrated Graphics Processor
- Multi-VGA output support: DVI/RGB ports
- Supports DVI with max. resolution 1920 x 1200 @ 60 Hz
- Supports RGB with max. resolution 2048 x 1536 @ 75 Hz
- Maximum shared memory of 1696 MB
- Supports Intel HD Graphics

Multi-GPU Support:

- Supports AMD Quad-GPU CrossFireX Technology

Expansion Slots:

- 1 x PCIe 3.0/2.0 x16 (blue)
- 1 x PCIe 2.0 x16 (x4 mode, black)
- 2 x PCIe 2.0 x1
- 3 x PCI

Storage:

- Intel B75 chipset
- 1 x SATA 6Gb/s port(s), gray
- 5 x SATA 3Gb/s port(s), blue
- Supports Intel Rapid Start Technology, Intel Smart Connect Technology

LAN:

- Realtek 8111E , 1 x Gigabit LAN Controller(s)

Audio:

- Realtek ALC887-VD2 8-Channel High Definition Audio CODEC
- Supports: Jack-detection, Multi-streaming, Front Panel Jack-retasking
- Optical S/PDIF out port(s) at back panel

USB Ports:

- Intel B75 chipset: 4 x USB 3.0 port(s) (2 at back panel, blue, 2 at mid-board)
- Intel B75 chipset: 8 x USB 2.0 port(s) (4 at back panel, black, 4 at mid-board)

Back I/O Ports:

- 1 x PS/2 keyboard (purple)
- 1 x PS/2 mouse (green)
- 1 x DVI
- 1 x D-Sub
- 1 x LAN (RJ45) port(s)
- 2 x USB 3.0
- 4 x USB 2.0
- 3 x Audio jack(s)

Internal I/O Ports:

- 1 x USB 3.0 connector(s) support(s) additional 2 USB 3.0 port(s)
- 2 x USB 2.0 connector(s) support(s) additional 4 USB 2.0 port(s)
- 1 x COM port(s) connector(s)
- 1 x SATA 6Gb/s connector(s)
- 5 x SATA 3Gb/s connector(s)
- 1 x CPU Fan connector(s)
- 2 x Chassis Fan connector(s)
- 1 x S/PDIF out header(s)
- 1 x 24-pin EATX Power connector(s)
- 1 x 8-pin ATX 12V Power connector(s)
- 1 x parallel port connector(s)
- 1 x Front panel audio connector(s) (AAFP)
- 1 x System panel(s)
- 1 x MemOK! button(s)
- 1 x Clear CMOS jumper(s)

Form Factor:

- ATX Form Factor
- 12 inch x 8.6 inch ( 30.5 cm x 21.9 cm )

About SCT (Smart Connect Technology):

Technology is evolving and improving with every new day so, to keep up and to make the most of your devices, it’s best if you use the latest software available. Intel’s Smart Connect Technology, for instance, could prove useful when time isn’t on your side.

If this utility is installed, compatible systems will be able to wake from different sleep states and enable network connectivity, which, in turn, allows applications to receive updates. Once the task is complete, the computer automatically goes back into sleep mode.

As a precaution, Intel Smart Connect Technology can prevent this action from taking place if the system has a low battery level (if present), or its temperature is high. Moreover, time interval between two wake-up-actions can be manually configured.

To apply this release, first make sure your configuration supports the technology, then get the package, run the available setup, and follow the displayed instructions for a complete installation.

Bear in mind that even though other platforms might be compatible as well, we do not recommend installing any software on OSes other than the specified ones.

Therefore, if you wish to install this software, click the download button, run the setup, and you will see for yourself how much time it can save you. Also, constantly check with our website to be the first one to find out when a new version is available.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers

Find Missing Drivers

© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.