INSYS MoRoS 2.0 DIN Rail Firmware 2.12.7 Download

Posted at November 5, 2024 by PCI-DB Team

INSYS MoRoS 2.0 DIN Rail Firmware 2.12.7 Description

Functional Enhancements:

- WLAN (EBW-W100/EBW-WH100): new access point functionality
- LAN (ext) for EBW routers: new function LAN (ext)
- E-mail: new attachment available: ASCII configuration file
- OpenVPN: latest version 2.3.8 implemented
- OpenVPN: additional Hash algorithms (SHA-224, SHA-256, SHA-384, SHA-512) configurable
- SIM card: status display in web interface if SIM card is not present or cannot be accessed
- Serial Ethernet: optional automatic connection closure after configurable maximum time
- Serial Ethernet: DTR line is supported for MoRoS device family
- Automatic update: download cancellation (HTTP or FTP) if a time of 2 hours is exceeded

Further Improvements:

- EBW-L: connection stability for 3G/4G and behaviour with daily logout/login optimised
- EBW-L: immediate use of network limitation (2G/3G/4G) without restart
- Serial Ethernet interface MoRoS: functional improvement
- Serial interface IMON-G100/200 and INSYS SDSL: correct function of the DCD and RI lines
- Sandbox for MoRoS and MLR: correct access to serial interface
- EBW/MLR/INSYS SDSL/RSM: I/O binary configuration is ignored or devices without I/O function
- EBW-L: incoming NAT works upon restart
- ASCII text file: port forwarding function will also be taken over if "apply" parameter is missing
- MoRoS ADSL: Communication with ADSL modem optimised

Important notes:

- If your device has a previous firmware version of at least 1.x.x this update cannot be used!
- If your device has a previous firmware version of at least 2.0.0 but before 2.3.0, an intermediate update step to 2.2.1, and then an intermediate update step to 2.6.2 must be performed before.
- If your device has a previous firmware version of at least 2.3.0 but before 2.6.0, an intermediate update step to 2.6.2 must be performed before.

Preconditions:

- Make sure nobody else is working on the web interface too!
- The power supply must not fail or be switched off in any case!
- We recommend to save the configuration first.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related INSYS Drivers