Dell Alienware 18 Intel USB 3.0 Driver 2.0.0.102/X00 for Windows 7 64-bit Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Dell Alienware 18 Intel USB 3.0 Driver 2.0.0.102/X00 for Windows 7 64-bit
Category	Motherboard
Manufacturer	Intel
File Size	13.7 MB
Supported OS	Windows 7 64 bit

Dell Alienware 18 Intel USB 3.0 Driver 2.0.0.102/X00 for Windows 7 64-bit Description

This package provides Intel USB 3.0 eXtensible Host Controller Driver.

Fixes & Enhancements

- Support USB3.0 driver for Intel PCH C1/C2 version.

Important Information

- Support USB3.0 driver for Intel PCH C1/C2 version.

Dell Update Package (DUP) Instructions

Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.

Hard Drive Installation (via WinZip) with Setup.exe File

Download
1. Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to disk and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file icon appears on your desktop.

Install
1. Double-click the new icon on the desktop
2. The Self-Extracting window appears and prompts you to extract or unzip to "C:\DELL\DRIVERS\DW2CT".(Where 'DW2CT' is the name of the file to be downloaded). Write down this path so the executable (I.e.Setup.exe) file can be found later.
3. The Self-Extractor window appears.
4. Click OK.
5. After completing the file extraction, if the Self-Extractor window is still open, close it.
6. Click Start button and then click Run.
7. Type "C:\DELL\DRIVERS\DW2CT" (where 'DW2CT' is the name of the file) in the Open textbox and then click OK.
8. Follow the on-screen installation instructions.

About On-board USB Driver:

Windows operating systems automatically apply a generic driver that allows users to transfer files using the USB (Universal Serial Bus) port; however, installing the appropriate software can bring about significant changes.

If the proper USB software is installed, systems will benefit from improved compatibility with different devices, numerous fixes regarding USB issues, and various other changes that can increase transfer speed with external storage drives.

When it comes to the installation steps, simply check to make sure that the download record is compatible with your system characteristics, get the package, run the setup, and follow the on-screen instructions for a complete update.

Bear in mind that even though other OSes might be compatible, it would be best if you applied this package only on specified platforms. In addition to that, as technology evolves from one day to another, we recommended that you always use the latest software available.

That being said, click the download button, get and apply the present version and enjoy your newly updated system. Also, constantly check back with our website to find out when a new version is available. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers