Dell Alienware 18 BIOS A12 Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Dell Alienware 18 BIOS A12
Category	Bios
Manufacturer	Dell
File Size	10.9 MB
Supported OS	OS Independent

Dell Alienware 18 BIOS A12 Description

Dell Alienware 18 System BIOS update compatible with Windows and DOS.

Fixes & Enhancements

Enhancements:
- Disable PCIe Active State Power Management of Nvidia GTX980 MXM Card.

Important Information

 - Support NVIDIA Graphic Card GTX970M and GTX980M.

Warning:

Do not turn off your computer or disconnect from your power source while updating the BIOS/Firmware or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

Installation instructions

[Run the BIOS update utility from Windows environment]
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.

[Run the BIOS update utility from DOS environment, if Legacy Boot mode (Non-Windows users)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. After BIOS update finished, system will auto reboot to take effect.

[Run the BIOS update utility from DOS environment, if UEFI Boot mode with Load Legacy Option disabled (Non-Windows users)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot Boot List Option".
3. Change "UEFI" to "Legacy" of Boot List Option
4. Go to "Exit Exit Save Changes" and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot.
8. Go to BIOS Setup by pressing F2 and go to "Boot Boot List Option".
9. Change "Legacy" to "UEFI" Boot Option.
10. Go to "Exit Exit Save Changes" and reboot system.

About BIOS:

Although installing a newer BIOS version might add new features, update various components, or improve the device’s usability, this process is very risky, so the upgrade is recommended to be performed only when it is really needed.

In addition to that, this task should be performed by someone who has the knowledge to successfully complete the installation; regular users may fulfill it at their own risk.

When it comes to applying a new version without taking into account the computer’s operating system, the most commonly used method to flash the BIOS is by creating a bootable USB or CD containing the update file, and running it from DOS.

Still, regardless of the method used or whether the upgrade is performed by a regular or power user, it’s recommended that the new BIOS be applied in a steady power environment such as the one ensured by a UPS unit.

The Basic Input/Output System (BIOS) is a very important software that loads the currently installed OS, and tests all of the system’s hardware components – so make sure you flash it correctly.

Bear in mind that failing to perform a successful installation could seriously damage your device, and the faulty BIOS resulted from the process might even render it unusable.

So, if this release includes useful changes, hit the download button, get the package, and update your BIOS version. Otherwise, check with our website as often as possible, so that you don’t miss the release that you need.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Dell Drivers