Dell LITEONIT Solid State Drive Firmware HM7110E/A03 Download

Posted at November 21, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Dell LITEONIT Solid State Drive Firmware HM7110E/A03
Category	Hdd Ssd Nas Usb Flash
Manufacturer	LiteOn
File Size	3 MB
Supported OS	Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows 8.1 ,Windows 8.1 64 bit ,Windows 10 ,Windows 10 64 bit

Dell LITEONIT Solid State Drive Firmware HM7110E/A03 Description

This package provides the firmware for LITEONIT LMT-128L9M mSATA 128GB, Revision HM7110e, and is supported on Inspiron, Latitude, Precision and XPS models.

Fixes & Enhancements

- Improves compatibility with low power mode

Firmware upgrade through the Windows utility

ATTENTION
1. Backup the user data in Solid-State Drive.
2. Switch to AC Power.
3. Put targeted SSD which want to be flashed FW as slave drive or use it as external storage device drive via the USB port.
4. New FW only can be actived after reboot or power reset.
5. This utility can face flash FW by the same FW version SSD, that is it will face flash FW HMx110E/HM9110F/6M8410D again if the FW in target SSD is HMx110E/HM9110F/6M8410D already.

Procedure

1. Run the utility contained therein to start firmware update process.
2. On the first screen, if the target SSD is not listed, select it and then Click "Update".
3. The next screen is a warning message. It states the risks and reminds user to backup important files before proceeding. Please click OK to proceed.
4. Firmware upgrade will proceed. When the firmware upgrade process completes, the user will be prompted to reboot the machine. Please close all open applications and save your work before rebooting your machine.
5. The system will reboot and load the firmware. Once the firmware update is complete (screen will show firmware update done), you can boot into Windows.
6. To confirm the firmware update was successful, open Device manager - open SSD - click Properties - choose hardware ID under Details and check the firmware version.

About SSD Firmware:

Changing the solid-state drive (SSD) firmware version can bring about a wide variety of changes such as stability improvements for different sleep states, power consumption enhancements, increased read/write speeds, optimized compatibility with various systems, and many others.

However, performing this step is very risky because it can damage the SSD’s software in the event of an update failure. Therefore, make sure you consider changing the firmware only when and if the new version includes changes that you can make use of.

As for the installation method, given the huge number of SSD manufacturers and the wide variety of solid-state drives, it’s recommended that you carefully read and understand the update guide, and initiate the upgrade only when you have completely familiarized yourself with the steps.

In addition to that, most SSD manufacturers also require additional software that will help you apply a new firmware using a specific method – so make sure you have everything you need for a complete and successful upgrade.

Another aspect you should keep in mind is that this task must be performed in a steady power environment, such as the one provided by a UPS unit. Don’t forget to reboot the system so that the newly made changes can take effect.

That being said, if this release includes the changes you need / desire, click the download button and get the firmware file. If not, check with our website constantly in order to find out first when a suitable update becomes available. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related LiteOn Drivers