D-Link DCS-5010L revA1 Camera Firmware 1.04_B17 Download

Posted at December 22, 2024 by PCI-DB Team

D-Link DCS-5010L revA1 Camera Firmware 1.04_B17 Description

Pan & Tilt Day/Night Network Camera

- Pan & Tilt Function - Remotely pan and tilt live video and keep an eye on a larger area
- Motion Detection - Email alerting based on motion sensing technology
- 66o Horizontal Field of View - Keep an eye on more area
- Night Vision - View up to 26 feet in complete darkness
- Wireless N - Wireless N for flexible placement
- Remote Viewing - No fees or monthly subscription

New Features

1. Support DIRECT mode.
2. Add support mydlink Home
3. New mydlink agent v2.0.18-b30
4. Remove DDNS “DynDns (Free)” and “(Custom)”.
5. Clears Dlink15Register flag to 0 when factory reset

Problems Fixed

1. Fixed e-mail interval issue on motion/sound detection mode.
2. Fixed CGI stream_info.cgi issue.
3. Fixed bad Motion JPEG frame issue.
4. Fixed CGI notify_stream.cgi issue (disable motion/sound detection when move P/T).
5. Fixed day light saving issue (cross year case).
6. Fixed e-mail sometimes not send issue.
7. Fixed DDNS issue (incorrect password case).
8. Fixed NTP issue under PPPoE mode.
9. Fixed ICR/IR issue on night when set as “Always Day Mode”.
10. Fixed FTP issue if FTP session is disconnected unexpectedly.

Upgrading Instructions:

Follow the steps below to upgrade the firmware:
1. Download the latest firmware file from the D-Link website. The file is in .bin file format.
2. Log-in camera web UI and enter setup/Maintenance/Firmware upgrade 3. Click Browse… and specify the firmware file.
3. Click Upgrade. The camera starts to upgrade and will reboot automatically when the upgrade completes.

About Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related D-Link Drivers