D-Link DCS-2330L revA1 Camera Firmware 1.02.03 Download

Posted at April 28, 2024 by PCI-DB Team

D-Link DCS-2330L revA1 Camera Firmware 1.02.03 Description

HD Outdoor Wi-Fi Camera

 
- Outdoor-Ready - IP65 weatherproof housing protects the camera from the elements 
- 720p HD - Superior image quality for your surveillance video 
- Motion Detection - Enhanced email alerting based on motion sensing technology 
- Night Vision - View up to 15 feet in complete darkness 
- Remote Viewing - View on iPhone, iPad or Android with mydlink app or mydlink.com 
- Local Recording - Record video directly to a microSD card (card not included)

New Features

1. Update mydlink agent version to 2.0.18-b09
2. Add new DDNS selection
3. Add support for Motion detection, direct MJPEG decoding, and Privacy masks on non-IE browsers
4. Add 50MB/30 sec Event on SD function
5. Add default UI language detection
6. Add 720P resolution for profile 2
7. Add Bonjour Name function
8. Enhance the Wi-Fi stability

Problems Fixed

1. Fixed the issue that the certificate on the camera wouldn’t be reset after factory reset.
2. Fixed the issue that after performing the endurance test, camera would stop uploading snapshots to SMB when periodic trigger is set.
3. Fixed the issue of image with green tone in some case.
4. Fixed the issue of access permission configured on Access List.
5. Revised Helpful Hints for clarity.

Upgrading Instructions:

Follow the steps below to upgrade the firmware:
1. Download the latest firmware file from the D-Link website. The file is in .bin file format.
2. Log-in camera web UI and enter setup/Maintenance/Firmware upgrade 3. Click Browse… and specify the firmware file.
3. Click Upgrade. The camera starts to upgrade and will reboot automatically when the upgrade completes.

About Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related D-Link Drivers