ASRock QC5000M AMD AHCI Driver 1.3.1.220 for XP Download

Posted at December 3, 2024 by PCI-DB Team

ASRock QC5000M AMD AHCI Driver 1.3.1.220 for XP Description

Key Features:

- AMD FT3 Kabini A4-5000 Quad-Core APU
- Solid Capacitor design
- Supports DDR3 1600
- 1 PCIe 2.0 x16 (x4 mode), 2 PCIe 2.0 x1
- Graphics Output Options : D-Sub, HDMI
- Integrated AMD Radeon HD 8330 Graphics, DX11.1, PS5.0
- 2 x USB 3.0, 8 x USB 2.0 (4 Front, 4 Rear), 2 x SATA3, 1 x COM Port
- Realtek Gigabit LAN
- 7.1 CH HD Audio (Realtek ALC887 Audio Codec), ELNA Audio Caps
- Supports ASRock Full Spike Protection, USB Key

About SATA / AHCI / RAID Drivers:

When you install an operating system, SATA settings (be it AHCI, RAID, or IDE mode) are detected from the BIOS. If you want to change from one mode to another after the OS has been applied, appropriate drivers are required.

Bear in mind that if you modify these settings without installing proper files first, the operating system will not be able to boot until changes are reverted or required drivers are applied.

To perform the latter task, get the package, run the available setup and follow the instructions displayed on-screen for a complete installation. Afterwards, perform a system reboot so that all changes take effect, enter BIOS menu, and set the SATA option to the mode that best describes the newly applied drivers.

So, if you intend to modify the SATA settings to the mode described by this release, click the download button, and make the desired changes. In addition to that, don’t forget to constantly check with our website so that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related AMD Drivers