Gigabyte GA-E350N (rev. 3.0) AMD Chipset Driver 12.102 for Windows 7/Windows 8 Download

Posted at November 21, 2024 by PCI-DB Team

Gigabyte GA-E350N (rev. 3.0) AMD Chipset Driver 12.102 for Windows 7/Windows 8 Description

Specifications:

APU:
- Built in with an AMD E-350D Dual-Core processor
- Built in with an AMD Radeon HD 6310 (DirectX 11) graphics core

Chipset:

- AMD A45 FCH

Memory:

- 2 x 1.5V DDR3 DIMM sockets supporting up to 16GB of system memory
- Single channel memory architecture
- Support for DDR3 1333 (O.C.)/1066 MHz memory modules

Onboard Graphics:

- Integrated in the APU
- 1 x D-Sub port
- 1 x HDMI port, supporting a maximum resolution of 1920x1200

Audio:

- Realtek HD audio codec
- High Definition Audio
- 2/4/5.1/7.1-channel
- Support for S/PDIF Out

LAN:

- Realtek GbE LAN chip (10/100/1000 Mbit)

Expansion Slots:

- 1 x PCI slot

Storage Interface:

- 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices

USB:

- Up to 8 USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)

Internal I/O Connectors:

- 1 x 24-pin ATX main power connector
- 1 x 4-pin ATX 12V power connector
- 4 x SATA 3Gb/s connectors
- 1 x CPU fan header
- 1 x system fan header
- 1 x front panel header
- 1 x front panel audio header
- 1 x S/PDIF Out header
- 2 x USB 2.0/1.1 headers
- 1 x chassis intrusion header
- 1 x power LED header
- 1 x Clear CMOS jumper

Back Panel Connectors:

- 1 x PS/2 keyboard port
- 1 x PS/2 mouse port
- 1 x parallel port
- 1 x serial port
- 1 x D-Sub port
- 1 x HDMI port
- 4 x USB 2.0/1.1 ports
- 1 x RJ-45 port
- 3 x audio jacks (Line In/Line Out/Microphone)

I/O Controller:

- iTE I/O Controller Chip

H/W Monitoring:

- System voltage detection
- CPU/System temperature detection
- CPU/System fan speed detection
- CPU overheating warning
- CPU/System fan fail warning
- CPU/System fan speed control

Form Factor:

- Mini-ITX Form Factor: 17.0cm x 17.0cm

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related AMD Drivers