D-Link DAP-1522 revA Access Point Firmware 1.02 Download

Posted at December 22, 2024 by PCI-DB Team

D-Link DAP-1522 revA Access Point Firmware 1.02 Description

Xtreme N Duo Wireless N Access Point DAP-1522

Create a new Wi-Fi network or wirelessly connect two networks together with the D-Link Xtreme N Duo Wireless Bridge/Access Point (DAP-1522). Optimize your new or expanded network to stream HD media, play multiplayer games, or make Internet phone calls (VoIP).
- 4-Port switch adds wireless connectivity to Ethernet-enabled devices in your entertainment center
- Dual band technology helps avoid interference and ensures smooth video streaming and online gaming
- Wi-Fi Protected Setup Push Button for simple installation
- WPA and WPA2 encryption provides high-level security for your network
- Backward compatible with Wireless G devices

Fixes:

1. Fixed the Bridge mode will send Prob-request for scanning in DFS band.
2. Fixed the bug that PC can’t get IP through 1522 bridge mode if DHCP server sends Unicast response.
3. Fixed the bug that UDP has high packet lost rate in some boards.
4. Fixed the bug that IGMP Snooping will drop UPnP SSDP packets.

About Access Point Firmware:

If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.

Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it’s anything but that.

It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.

With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related D-Link Drivers