Fujifilm X-T1 Camera Firmware 4.20 Download

Posted at December 18, 2024 by PCI-DB Team

Fujifilm X-T1 Camera Firmware 4.20 Description

Using a flashgun in Bracketing / Continuous shooting

- Optional flashguns can be used for bracketing and burst photography. When using the EF-X8, which is bundled with the X-T1, the flash fires in ISO, FILM SIMULATION and WHITE BALANCE BKT modes.
- A flashgun may not fire in case it is not charged enough between shootings. And continuous shooting in CL and CH mode becomes ​slow when Focus mode is AF-C.

Instant AF Setting in manual focus

- Focus and exposure can be locked when the AF-L button is used in manual focus mode. You can shoot after locking AF and AE with your thumb.

AF+MF operation with AF-L button

- The AF-L button can be used to lock focus in AF+MF mode and you can adjust the focus more accurately using the lens's focusing ring.

Focus zoom in AF+MF

- The FOCUS ASSIST button can be used for focus zoom and you can focus using the lens's focusing ring with focus zoom activated.

Additional Custom Display options

- Functions have been added to the DISP. CUSTOM SETTING option in the setup menu.
- Additional Items: FOCUS FRAME / CONTINUOUS MODE / SHOOTING MODE / DUAL IS MODE / INFORMATION BACKGROUND / MOVIE MODE / FOCUS MODE / BLUR WARNING / SHUTTER TYPE

The Fn7 Button

- The movie-record button doubles as an Fn button (Fn7). Press and hold DISP/BACK to select what it controls.

Precaution

- If firmware updating fails, the camera may no longer operate correctly in some cases. Carefully read the notes provided here.
- Always use the fully-charged battery when updating the firmware as a basic manner. Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.
- Firmware updating requires approximately 90 seconds.
- Once the firmware has been updated, some data of the previous version cannot be restored.

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Fujifilm Drivers