PCI-DB.com
  1. Driver
  2. Other Drivers Tools
  3. ASIX MCS7840 USB to Quad Serial Controller Driver 2.2.0 for Linux

ASIX MCS7840 USB to Quad Serial Controller Driver 2.2.0 for Linux Download

Posted at March 28, 2024 by PCI-DB Team

Install Driver Automatically
Device NameASIX MCS7840 USB to Quad Serial Controller Driver 2.2.0 for Linux
CategoryOther Drivers Tools
ManufacturerASIX
File Size29 KB
Supported OSLinux

ASIX MCS7840 USB to Quad Serial Controller Driver 2.2.0 for Linux Description

Features:

- USB-2.0 Device Controller
- On-Chip USB-2.0 PHY
- On-Chip Voltage Regulators
- Four 16c450/16c550 compatible UARTs
- Supports SIR IrDA Mode on any/all ports
- Supports RS-232, RS-485 and RS-422 Serial Ports
- 5, 6, 7 & 8-bit Serial Data support
- Hardware and Software Flow Control
- Serial Port speeds from 50 bps to 6 Mbps
- Custom BAUD Rates supported through external clock and/or by programming the internal PLL
- On-Chip 512-Byte FIFOs for upstream and downstream data transfers for each Serial Port
- Supports Remote Wakeup and Power Management features
- Serial Port Transceiver Shut-Down support
- Two-Wire I²C Interface for EEPROM
- EEPROM read/write through USB
- iSerial feature support with EEPROM
- One Bi-directional multi-function GPIO
- On-Chip buffers for Serial Port signals to operate without external Transceivers over short cable lengths
- Bus-Powered Device
- 64-Pin LQFP Package RoHS compliant
- Operating temperature range: 0°C to +70°C

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related ASIX Drivers

Find Missing Drivers

© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.