Gigabyte GA-F2A55M-DS2 (rev. 1.2) AMD AHCI Preinstall Driver 1.3.1.156 for Windows 8.1 Download

Posted at December 3, 2024 by PCI-DB Team

Gigabyte GA-F2A55M-DS2 (rev. 1.2) AMD AHCI Preinstall Driver 1.3.1.156 for Windows 8.1 Description

Specifications:

APU:
- FM2 Socket:
- AMD A series processors
- AMD Athlon series processors

Chipset:

- AMD A55

Memory:

- 2 x 1.5V DDR3 DIMM sockets supporting up to 64 GB of system memory
- Dual channel memory architecture
- Support for DDR3 2400(OC)/1866/1600/1333/1066 MHz memory modules
- Support for AMD Memory Profile (AMP)/ Extreme Memory Profile (XMP) memory modules
- “Memory support is dependent on memory module compatibility and system OS”.

Onboard Graphics:

- APU with integrated AMD Radeon HD 8000/7000 series graphics:
- To use the onboard graphics ports, you must install an AMD APU with integrated graphics.
- 1 x D-Sub port
- 1 x DVI-D port, supporting a maximum resolution of 2560x1600
- Support for 2560x1600 resolution requires both a monitor and cable that support Dual Link DVI.
- The DVI-D port does not support D-Sub connection by adapter.

Audio:

- Realtek ALC887 codec
- High Definition Audio
- 2/4/5.1/7.1-channel
- Support for S/PDIF Out

LAN:

- Realtek GbE LAN chip (10/100/1000 Mbit)

Expansion Slots:

- 1 x PCI Express x16 slot, running at x16
- 1 x PCI Express x1 slot
- (All PCI Express slots conform to PCI Express 2.0 standard.)
- 1 x PCI slot

Multi-Graphics Technology:

- Support for AMD Dual Graphics technology
- Only A series APUs support AMD Dual Graphics.

Storage:

- 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices
- Support for RAID 0, RAID 1, RAID 10, and JBOD

USB:

- Up to 8 USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)

Internal I/O Connectors:

- 1 x 24-pin ATX main power connector
- 1 x 8-pin ATX 12V power connector
- 4 x SATA 3Gb/s connectors
- 1 x APU fan header
- 1 x system fan header
- 1 x front panel header
- 1 x front panel audio header
- 1 x S/PDIF Out header
- 2 x USB 2.0/1.1 headers
- 1 x serial port header
- 1 x Clear CMOS jumper

Back Panel Connectors:

- 1 x PS/2 keyboard port
- 1 x PS/2 mouse port
- 1 x D-Sub port
- 1 x DVI-D port
- 4 x USB 2.0/1.1 ports
- 1 x RJ-45 port
- 3 x audio jacks (Line In/Line Out/Microphone)

I/O Controller:

- iTE I/O Controller Chip

H/W Monitoring:

- System voltage detection
- APU/System temperature detection
- APU/System fan speed detection
- APU overheating warning
- APU/System fan fail warning
- APU/System fan speed control
- Whether the APU/system fan speed control function is supported will depend on the APU/system cooler you install.

BIOS:

- 2 x 32 Mbit flash
- Use of licensed AMI EFI BIOS
- Support for DualBIOS
- PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related AMD Drivers