Philips 7FF2FPA/27E Digital Photo Frame Firmware 1.0.14 Download

Posted at April 28, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Philips 7FF2FPA/27E Digital Photo Frame Firmware 1.0.14
Category	Firmware
Manufacturer	Philips
File Size	1.1 MB
Supported OS	Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit

Philips 7FF2FPA/27E Digital Photo Frame Firmware 1.0.14 Description

Fixes:

Please follow the steps below to upgrade the PhotoFrame firmware.
1. Format SD (Secure Digital) card
2. Copy all files from the ‘Firmware’ folder into the root folder of the SD card (The root folder is the ‘highest’ folder in hierarchy, for example F:\)
3. Make sure PhotoFrame is powered Off
4. Insert SD into PhotoFrame with the new firmware into the PhotoFrame
5. Push the Power button to power on the PhotoFrame
6. The firmware upgrade will start automatically

Warning

: Upgrade takes about 1 minute. During the upgrade do not disconnect power, remove the memory or make new connections. Otherwise this may harm your PhotoFrame.

7. When "System will reboot after replugging out of the memory card" shows, firmware upgrade has finished
8. Remove the memory card from the PhotoFrame, PhotoFrame will reboot.
9. The upgrade has completed

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Philips Drivers