ECS A740GM-M (PCB: 1.x) ATI VGA Driver 8.593.100 for Win7 Download

Posted at November 2, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	ECS A740GM-M (PCB: 1.x) ATI VGA Driver 8.593.100 for Win7
Category	Graphics Board
Manufacturer	ATI
File Size	98.3 MB
Supported OS	Windows 7 ,Windows 7 64 bit

ECS A740GM-M (PCB: 1.x) ATI VGA Driver 8.593.100 for Win7 Description

CPU 
AMD Phenom processor (Socket AM2+)
AMD Athlon 64 X2 Dual Core/ Athlon 64 / Sempron processor
High-performance Hyper Transport CPU interface.
Support transfer rate of 2000/1600/1200 mega-transfers per second
Note: This board supports CPU up to 95W TDP only; you can refer to AMD website to check your CPU.

CHIPSET
AMD 740G & AMD SB700
North Bridge: AMD 740G
South Bridge: AMD SB700

GRAPHICS
On Chip ( AMD 740G with 2D/3D graphic engine)
Integrated DirectX 9 graphics processor
Max Dynamic HyperMemory: 896MB(Vista) / 700MB (XP)

MEMORY
Dual-channel DDR2 memory architecture
2 x 240-pin DDR2 DIMM socket support up to 16 GB*
Support DDR2 800/667/533/400 DDR2 SDRAM
* (Due to the DRAM maximum size is 2GB at present, the memory maximum size we have tested is 4GB)

EXPANSION SLOT
1 x PCI Express x16 slot
1 x PCI Express x1 slot
2 x PCI slots

STORAGE
Support by AMD SB700
2 x Ultra DMA133/100/66 devices
6 x Serial ATAII 3.0Gb/s devices
RAID0, RAID1, RAID10 configuration

AUDIO
Compliant with HD audio specification
IDT 92HD202 6-channel audio ( CO-lay 92HD206)

LAN
Atheros L1 GbE LOM (Co-lay L2)

REAR PANEL I/O
1 x PS/2 keyboard & PS/2 mouse connectors
1 x Ethernet Port
1 x Serial port (COM1)
4 x USB ports
1 x Audio port (Line-in, Line-out, Mic-in)
1 x VGA port
1 x DVI connector

INTERNAL I/O CONNECTORS & HEADERS
1 x 24-pin ATX Power Supply connector
1 x 4-pin ATX 12V connector
CPUFAN/SYSFAN connectors
3 x USB headers
1 x IR header
1 x LPT1 header
6 x Serial ATA 3Gb/s connectors
1 x IDE connector
1 x Speaker header
1 x Front panel switch/LED header
1 x Front panel audio header
1 x SPDIF out header
1 x CD in header

SYSTEM BIOS
AMI BIOS with 8Mb SPI ROM
Supports Plug and Play, STR/STD, Hardware monitor, Multi Boot, DMI
Supports ACPI revision 3.0 specification

FORM FACTOR
Micro-ATX Size, 244mm*210mm

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related ATI Drivers