ASRock IMB-150 Intel Smart Connect Driver 4.2.41.2710 Download

Posted at December 22, 2024 by PCI-DB Team

ASRock IMB-150 Intel Smart Connect Driver 4.2.41.2710 Description

Specifications:

Form Factor:
- Dimensions: Mini-ITX (6.7-in x 6.7-in)

Processor System:

- CPU: Intel Celeron Processor J1900/N2930/N2920
- Core Number: 4
- Max Speed: (By CPU)
- L3 Cache: 2MB
- Chipset: N/A
- BIOS: UEFI

Expansion Slot:

- PCI: 0
- Mini-PCIe: 1 (Full Size)
- mSATA: 1
- PCIe: 1
- CFast Card Socket: 0

Memory:

- Technology: Dual Channel DDR3 1333 MHz SDRAM
- Max.: 8GB
- Socket: 2 x SO-DIMM

Graphics:

- Controller: Intel Gen7 Intel Graphics DX 11, OGL3.2
- VRAM: Shared Memory
- VGA: Supports max. resolution 1920x1200
- LVDS: Dual Channel 24-bit, max resolution 1920x1200@60Hz
- HDMI: Supports HDMI 1.3a, max resolution 1920x1200
- DVI: No
- DisplayPort: No
- MultiDisplay: Yes (Dual Display)

Ethernet:

- Ethernet: 10/100/1000 Mbps
- Controller: GbE LAN: 2 x Realtek RTL8111G-CG
- Connector: 2 x RJ-45

SATA:

- Max Data Transfer Rate: SATA2 (3.0Gb/s)

Rear I/O:

- VGA: 1
- DVI: 0
- HDMI: 1
- DisplayPort: 0
- Ethernet: 2
- USB: 4 (2 x USB 3.0, 2 x USB 2.0)
- Audio: 2 (Mic-in, Line-out)
- Serial: 3 (RS-232/422/485)
- eSATA: 0
- PS2: 2 (1 x keyboard, 1 x mouse)

Internal Connector:

- USB: 6 (2 x USB 3.0, 4 x USB 2.0)
- LVDS / inverter: 1/1
- VGA: 1 (shared with rear I/O VGA COM)
- Serial: 2 (RS-232)
- SATA: 2 x SATA2 (3.0Gb/s)
- mPCIe: 1
- Parallel: 1
- mSATA: 1 (shared)
- IrDA: 0
- GPIO 8-bit: 4 x GPI + 4 x GPO
- SATA PWR Output Con: 1
- Speaker Header: 1

Watchdog Timer:

- Output: From Super I/O to drag RESETCON
- Interval: 256 segments, 0,1,2…255sec/min

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers