Posted at November 28, 2022 by PCI-DB TeamInstall Driver Automatically
|Device Name||Pioneer AVIC-6000NEX GPS Navigation Firmware 1.10|
|File Size||472 MB|
|Supported OS||OS Independent|
Please download and print these firmware update instructions before downloading and installing the firmware update. It is important that you complete all steps correctly and in the order described below.
In order to perform this update, you will need a blank USB storage device or microSD card (for AVIC5000NEX and AVIC-6000NEX) or SD card (for AVIC-7000NEX), 2 GB or larger in capacity, formatted to FAT32.
(For navigation system users)
- Once you install this firmware, all navigation function settings will be reset to factory default. Once the update has finished, you will need to reconfigure these settings.
- The only USB port that supports the firmware update is USB port 1.
- DO NOT turn your unit off, eject the SD memory card or disconnect the USB storage device while the firmware is being updated.
- You can only update the firmware when the vehicle is stopped and the parking brake is engaged.
Check whether the firmware of your unit needs to be updated by checking the version number of the firmware.
Updating the firmware on your GPS unit can add compatibility with various devices, fix several problems (such as incorrect translations), include support for some features, route calculation algorithms, and more.
If this present release is newer than the one already applied on your GPS navigation device, you can install it by transferring the package (or its content) to the GPS through a compatible memory card or via a USB cable, and initiate the update process from the device’s setup menu.
However, please note that performing the update without knowing all the steps isn’t recommended, because, worst case scenario, you could end up with a broken device. In other words, you’re to make sure you carefully read and understand the update guide in full.
That being said, if you consider applying this release, make sure you have all the knowledge you need to perform the upgrade successfully, hit the download button, and update your GPS Navigation unit.
Check with our website as often as possible to stay be up to date with the latest releases.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Find Missing Drivers