PCI-DB.com
  1. Driver
  2. Router Switch Access Point
  3. eWON Industrial VPN Router Firmware eBuddy P69 11_2s2 UK

eWON Industrial VPN Router Firmware eBuddy P69 11_2s2 UK Download

Posted at December 25, 2024 by PCI-DB Team

Install Driver Automatically
Device NameeWON Industrial VPN Router Firmware eBuddy P69 11_2s2 UK
CategoryRouter Switch Access Point
ManufacturereWON
File Size2 MB
Supported OSOS Independent

eWON Industrial VPN Router Firmware eBuddy P69 11_2s2 UK Description

Changes:

- FIXED: eWON stopped polling MPI after few hours
- FIXED: Synchronization error with default NTP server clock does no more lead to configure an invalid date
- FIXED: FLEXY: Flexy equipped with WAN ethernet extension board sometimes lost its Internet connection
- FIXED: Security update

Installation Procedure:

- Download the present eWON firmware on your PC.
- Download and install the latest eWON Router eBuddy Firmware Update Tool.
- Select the “Local Directory” option so that the utility will be able to use the downloaded firmware file.
- Rim the newly-installed eBuddy Firmware Update Tool.
- Go to Tools > Update Firmware (or simply press F3 key).
- Select an eWON, either by entering directly its IP address or by choosing it in the Browse dialog box; enter the login and password for the eWON, then click on Next in the Update Firmware Wizard.
- Select the firmware you want to apply, then click Next.
- A summary of what is currently on the eWON will show up.
- The new firmware is being uploaded to the selected eWON.
- When the upload is complete, the installation process will be initiated automatically.
- DO NOT power OFF the eWON during the firmware update process or this could lead to an unusable eWON.
- Click on the Finish Button to end the update process and exit from the Wizard.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related eWON Drivers

Find Missing Drivers

© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.