PCI-DB.com
  1. Driver
  2. Motherboard
  3. ASRock IMB-151 Intel Sideband Fabric Device Driver 1.70.305.16316

ASRock IMB-151 Intel Sideband Fabric Device Driver 1.70.305.16316 Download

Posted at November 21, 2024 by PCI-DB Team

Install Driver Automatically
Device NameASRock IMB-151 Intel Sideband Fabric Device Driver 1.70.305.16316
CategoryMotherboard
ManufacturerIntel
File Size1.3 MB
Supported OSWindows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit

ASRock IMB-151 Intel Sideband Fabric Device Driver 1.70.305.16316 Description

Specifications:

Form Factor:
- Dimensions: Mini-ITX (6.7-in x 6.7-in)

Processor System:

- CPU: Intel Celeron Processor J1900/N2930
- Core Number:: 4
- Max Speed:: (By CPU)
- L3 Cache:: 2MB
- Chipset:: N/A
- BIOS:: UEFI

Expansion Slot:

- PCI: 0
- Mini-PCIe: 1 (half size) + 1 (full size) shared
- mSATA: 1
- PCIe: 1
- CFast Card Socket: 0

Memory:

- Technology: Dual Channel DDR3 1333 MHz SDRAM
- Max.: 8GB
- Socket: 2 x SO-DIMM

Graphics:

- Controller: Intel Gen7 Intel Graphics DX 11, OGL3.2
- VRAM: Shared Memory
- VGA: Supports max. resolution 1920x1200
- LVDS: Dual Channel 24-bit, max resolution 1920x1200@60Hz
- HDMI: Supports HDMI 1.3a, max resolution 1920x1200
- DVI: No
- DisplayPort: No
- MultiDisplay: Yes (Dual Display)

Ethernet:

- Ethernet: 10/100/1000 Mbps
- Controller: GbE LAN Realtek
- Connector: 1 x RJ 45

SATA:

- Max Data Transfer Rate: SATA2 (3.0Gb/s)

Rear I/O:

- VGA: 1
- DVI: 0
- HDMI: 1
- DisplayPort: 0
- Ethernet: 1
- USB: 4 (2 x USB 3.0, 2 x USB 2.0)
- Audio: 2 (Mic-in, Line-out)
- Serial: 0
- eSATA: 0
- PS2: 0

Internal Connector:

- USB: 6 (2 x USB 3.0, 4 x USB 2.0)
- LVDS / inverter: 1/1
- VGA: 1 (shared with rear I/O VGA COM)
- Serial: 5 (1 x RS-232/422/485, 4 x RS-232)
- SATA: 2 x SATA2 (3.0Gb/s)
- mPCIe: 1
- Parallel: 1
- mSATA: 1 (shared)
- IrDA: 0
- GPIO 8-bit: 4in / 4 out
- SATA PWR Output Con: 1
- Speaker Header: 1

Watchdog Timer:

- Output: From Super I/O to drag RESETCON
- Interval: 256 segments, 0,1,2…255sec/min

Power Requirements:

- Input PWR: 9~19V DC-In (2-pin PWR Con)
- Power On: AT/ATX Supported, AT : Directly PWR on as Power input ready, ATX: Press Button to PWR on after Power input ready




  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers

Find Missing Drivers

© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.