ASRock IMB-152 Realtek LAN Driver 8.020 Download

Posted at November 4, 2024 by PCI-DB Team

ASRock IMB-152 Realtek LAN Driver 8.020 Description

Specifications

Form Factor:
- Dimensions: Mini-ITX (6.7-in x 6.7-in)

Processor System:

- CPU: Intel Celeron Processor J1900/N2930/N2920, Default J1900 Quad core processor
- Core Number: (By CPU, Max 4)
- Max Speed: (By CPU)
- L2 Cache: (By CPU)
- Chipset: (By CPU)
- BIOS: UEFI

Expansion Slot:

- PCI: 0
- Mini-PCIe: 1 (Half Size)
- mSATA: 0
- PCIe: 1 (x1)
- CFast Card Socket: 0

Memory:

- Technology: Single Channel DDR3L 1333 MHz SDRAM
- Max.: 4GB
- Socket: 1 x SO-DIMM

Graphics:

- Controller: Intel Gen7 Intel Graphics DX 11, OGL3.2
- VRAM: Shared Memory
- VGA: Supports max. resolution 1920 x 1200
- LVDS: Dual channel 24-bit, max resolution 1920 x 1200@60Hz
- HDMI: Supports HDMI 1.4a, max resolution 1920x1200
- DVI: No
- DisplayPort: No
- Multi Display: Yes (Dual Display)

Ethernet:

- Ethernet: 10/100/1000 Mbps
- Controller: GbE LAN: 1 x Realtek RTL8111G-CG, Optional Support 2 x Realtek RTL811g-CG
- Connector: 1 x RJ-45 Optional 2 x RJ-45

SATA:

- Max Data Transfer Rate: SATA2 (3.0Gb/s)

Rear I/O:

- VGA: 1
- DVI: 0
- HDMI: 1(Pin Header)
- DisplayPort: 0
- Ethernet: 1 Optional 2
- USB: 4 x USB 3.0
- Audio: 2 (Mic-in, Line-out)
- Serial: 3 x RS-232
- eSATA: 0
- PS2: 2 (1 x keyboard and 1 x mouse)

Internal Connector:

- USB: 6 (3 x 2.54 pitch header USB 2.0 compliant)
- LVDS / inverter: 1/1
- VGA: 0
- Serial: 3 (RS-232)
- SATA: 2 x SATA2 (3.0Gb/s)
- mPCIe: 1
- Parallel: 1
- mSATA: 0
- IrDA: 0
- GPIO 8-bit: 4 x GPI + 4 x GPO Share with COM 5
- SATA PWR Output Con: 1
- Speaker Header: 1

Watchdog Timer:

- Output: From Super I/O to drag RESET CON
- Interval: 256 segments, 0,1,2…255sec/min

Power Requirements:

- Input PWR: 12V DC-In (4-pin ATX PWR Con)
- Power OnAT/ATX Supported, AT : Directly PWR on as Power input ready, ATX: Press Button to PWR on after Power input ready

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related REALTEK Drivers