Posted at November 21, 2024 by PCI-DB Team
Install Driver AutomaticallyDevice Name | Gigabyte G1.Sniper (rev. 1.0) BigFoot LAN Driver 6.0.0.23 |
---|---|
Category | Network Card |
Manufacturer | BigFoot |
File Size | 72.7 MB |
Supported OS | Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit |
CPU
1. Support for an Intel Core i7 series processor in the LGA1366 package
2. L3 cache varies with CPU
QPI
1. 4.8GT/s, 6.4GT/s
Chipset
1. North Bridge: Intel X58 Express Chipset
2. South Bridge: Intel ICH10R
Memory
1. 6 x 1.5V DDR3 DIMM sockets supporting up to 24 GB of system memory
2. 3/Dual channel memory architecture
3. Support for DDR3 2200/1333/1066/800 MHz memory modules
4. Support for non-ECC memory modules
5. Support for Extreme Memory Profile (XMP) memory modules
Audio
1. 1 x Creative CA20K2 chip
2. Support for Dolby Digital Live and DTS Connect
3. Support for X-Fi Xtreme Fidelity and EAX Advanced HD 5.0 technologies
4. High Definition Audio
5. 2/4/5.1/7.1-channel
6. Support for S/PDIF Out
LAN
1. 1 x Bigfoot Killer E2100 chip (10/100/1000 Mbit)
Expansion Slots
1. 2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)
2. 1 x PCI Express x16 slot, running at x8 (PCIEX8)
3. 2 x PCI Express x1 slots
4. 1 x PCI slot
Multi-Graphics Technology
1. Support for 2-Way/3-Way ATI CrossFireX/NVIDIA SLI technology
Storage Interface
South Bridge:
1. 6 x SATA 3Gb/s connectors (SATA2_0~SATA2_5) supporting up to 6 SATA 3Gb/s devices
2. Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
Marvell 88SE9182 chip:
1. 2 x SATA 6Gb/s connectors (GSATA3_6, GSATA3_7) supporting up to 2 SATA 6Gb/s devices
2. Support for SATA RAID 0 and RAID 1
JMicron JMB362 chip:
1. 2 x eSATA 3Gb/s connectors (eSATA/USB Combo) on the back panel, supporting up to 2 SATA 3Gb/s devices
2. Support for SATA RAID 0, RAID 1, and JBOD
USB South Bridge:
1. Up to 12 USB 2.0/1.1 ports (6 on the back panel, including 2 eSATA/USB Combo, 6 via the USB brackets connected to the internal USB headers)
1 x Renesas D720200 chip and 2 x VLI VL810 hubs:
1. Up to 4 USB 3.0/2.0 ports (2 on the back panel, 2 via the USB bracket connected to the internal USB header)
Internal I/O Connectors
1. 1 x 24-pin ATX main power connecto
2. 1 x 8-pin ATX 12V power connector
3. 2 x SATA 6Gb/s connectors
4. 6 x SATA 3Gb/s connectors
5. 1 x CPU fan header
6. 1 x system fan header
7. 3 x fan headers
8. 1 x front panel header
9. 1 x front panel audio header
10. 1 x S/PDIF Out header
11. 3 x USB 2.0/1.1 headers
12. 1 x USB 3.0/2.0 header
13. 1 x clearing CMOS jumper
14. 1 x heatsink LED power connector
Back Panel Connectors
1. 1 x PS/2 keyboard port
2. 1 x PS/2 mouse port
3. 1 x optical S/PDIF Out connector
4. 1 x coaxial S/PDIF Out connector
5. 1 x CPU overclocking button
6. 4 x USB 2.0/1.1 ports
7. 2 x USB 3.0/2.0 ports
8. 2 x eSATA/USB Combo connectors
9. 1 x RJ-45 port
10. 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker Out, Line In/Mic In, Line Out)
I/O Controller
1. iTE IT8720 chip
H/W Monitoring
1. System voltage detection
2. CPU/System temperature detection
3. CPU/System fan speed detection
4. CPU overheating warning
5. CPU/System fan fail warning
6. CPU/System fan speed control
BIOS
1. 2 x 16 Mbit flash
2. Use of licensed AWARD BIOS
3. Support for DualBIOS
4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features
1. Support for @BIOS
2. Support for Q-Flash
3. Support for Xpress BIOS Rescue
4. Support for Download Center
5. Support for Xpress Install
6. Support for Xpress Recovery2
7. Support for EasyTune
8. Support for Dynamic Energy Saver 2
9. Support for Smart 6
10. Support for Auto Green
11. Support for eXtreme Hard Drive (X.H.D)
12. Support for ON/OFF Charge
13. Support for Cloud OC
14. Support for Q-Share
Bundle Software
1. Norton Internet Security (OEM version)
Form Factor
1. ATX Form Factor; 30.5cm x 26.4cm
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Device Type: Network Card File Size: 48.3 MB Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 64 bit ,Windows 8 64 bit ,Windows 8.1 64 bit
Install DriverDevice Type: Network Card File Size: Windows Vista 64 bit ,Windows 7 64 bit ,Windows 8 64 bit
Install DriverDevice Type: Network Card File Size: 48.3 MB Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 64 bit ,Windows 8 64 bit ,Windows 8.1 64 bit
Install DriverDevice Type: Network Card File Size: 45.1 MB Windows XP ,Windows Vista ,Windows 7 ,Windows 8 ,Windows 8.1
Install DriverDevice Type: Network Card File Size: 317.5 MB Windows 7 64 bit ,Windows 8 64 bit
Install DriverDevice Type: Network Card File Size: Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit
Install DriverDevice Type: Network Card File Size: 317.5 MB Windows 7 64 bit ,Windows 8 64 bit
Install DriverDevice Type: Network Card File Size: 159.2 MB Windows 7 64 bit ,Windows 8 64 bit ,Windows 8.1 64 bit
Install DriverDevice Type: Network Card File Size: 48.3 MB Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 64 bit ,Windows 8 64 bit ,Windows 8.1 64 bit
Install DriverDevice Type: Network Card File Size: 45.1 MB Windows XP ,Windows Vista ,Windows 7 ,Windows 8 ,Windows 8.1
Install DriverFind Missing Drivers
Recent Devices
Recent Drivers
© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.