Sony VPCCW1AGX Intel SATA Driver 9.6.0.1014 for Windows 7 64-bit Download

Posted at November 2, 2024 by PCI-DB Team

Sony VPCCW1AGX Intel SATA Driver 9.6.0.1014 for Windows 7 64-bit Description

Changes:

- Resolves an issue where a blue screen may occur while the computer is in use
- The driver display name has been changed for VPCCW2xx and VPCF11x models, from Intel PCHM SATA AHCI Controller 6 Port, to Intel 5 Series 6 Port SATA AHCI Controller on VPCCW2xx and VPCF11x models
- The utility has been changed from the Intel Matrix Storage Console to the Intel Rapid Storage Technology

Important Notes

- During the installation of this file, be sure that you are logged in as the Administrator or as a user with Administrative rights.
- To ensure that no other program interferes with the installation, save all work and close all other programs. The Taskbar should be clear of applications before proceeding.
- It is highly recommended that you print out these instructions for use as a reference during the installation process.

Download and Installation Instructions

- To ensure that no other program interferes with the installation, save all work and close all other programs. The Taskbar should be clear of applications before proceeding.
- Download the INDOTH-99999999-1042.EXE file to a temporary or download directory (please note this directory for reference).
- Go to the directory where the file was downloaded and double-click the INDOTH-99999999-1042.EXE file to begin the installation.
- At the "User Account Control" screen, click "Yes".
- At the "Intel 5 Series 6 Port SATA AHCI Controller / Intel ICH9M-E/M SATA AHCI Co..." screen, click "Next".
- At the "License Agreement" dialog, read the agreement, then, if you agree, click "I Agree" to continue with the installation.
- At the "Welcome to the Setup Program" window, click the checkbox next to "Install Intel Control Center" then click "Next".
- At the "License Agreement" dialog, read the agreement, then, if you agree, click "Yes" to continue with the installation.
- At the "Readme File Information" screen, click "Next".
- Click "Next" to continue.
- At the "Setup is Complete" screen, click "Yes, I want to restart this computer now", then click "Finish" to restart the computer.

About SATA / AHCI / RAID Drivers:

When you install an operating system, SATA settings (be it AHCI, RAID, or IDE mode) are detected from the BIOS. If you want to change from one mode to another after the OS has been applied, appropriate drivers are required.

Bear in mind that if you modify these settings without installing proper files first, the operating system will not be able to boot until changes are reverted or required drivers are applied.

To perform the latter task, get the package, run the available setup and follow the instructions displayed on-screen for a complete installation. Afterwards, perform a system reboot so that all changes take effect, enter BIOS menu, and set the SATA option to the mode that best describes the newly applied drivers.

So, if you intend to modify the SATA settings to the mode described by this release, click the download button, and make the desired changes. In addition to that, don’t forget to constantly check with our website so that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers