Sony Vaio SVF15215CXB Intel SATA Utility 12.8.0.1016 for Windows 8.1 64-bit Download

Posted at November 21, 2024 by PCI-DB Team

Sony Vaio SVF15215CXB Intel SATA Utility 12.8.0.1016 for Windows 8.1 64-bit Description

What Does This Do:

- This utility installs an updated version of the Intel SATA Driver.

This update is not for the following hardware IDs:

- PCI\VEN_1002&DEV_4391&SUBSYS_9082104D
- PCI\VEN_1002&DEV_4391&SUBSYS_908D104D
- PCI\VEN_1022&DEV_7804&SUBSYS_90AD104D
- PCI\VEN_1022&DEV_7804&SUBSYS_90C1104D
- PCI\VEN_144D&DEV_A800&SUBSYS_A811144D

How to check the hardware ID:

- Search for Device Manager and then click to open it.
- In Device Manager, double-click IDE ATA/ATAPI Controllers, and then double-click Standard SATA AHCI Controller.
- In the Properties window, click to select theDetails tab.
- On the Details tab, under Property click to select Hardware Ids on the drop down list.
- The hardware ID is displayed in the box under Value.

Important Notes

- During the installation of this file, be sure that you are logged in as the Administrator or as a user with Administrative rights.
- To ensure that no other program interferes with the installation, save all work and close all other programs. The Taskbar should be clear of applications before proceeding.
- It is highly recommended that you print out these instructions for use as a reference during the installation process.

Download and Installation Instructions

- To ensure that no other program interferes with the installation, save all work and close all other programs. The Taskbar should be clear of applications before proceeding.
- Download the INDOTH-P0310293-1102.EXE file to a temporary or download directory (please note this directory for reference).
- Go to the directory where the file was downloaded and double-click the INDOTH-P0310293-1102.EXE file to begin the installation.
- At the User Account Control screen, click Yes.
- Follow the on-screen instructions.
- Restart the computer.

About SATA / AHCI / RAID Drivers:

When you install an operating system, SATA settings (be it AHCI, RAID, or IDE mode) are detected from the BIOS. If you want to change from one mode to another after the OS has been applied, appropriate drivers are required.

Bear in mind that if you modify these settings without installing proper files first, the operating system will not be able to boot until changes are reverted or required drivers are applied.

To perform the latter task, get the package, run the available setup and follow the instructions displayed on-screen for a complete installation. Afterwards, perform a system reboot so that all changes take effect, enter BIOS menu, and set the SATA option to the mode that best describes the newly applied drivers.

So, if you intend to modify the SATA settings to the mode described by this release, click the download button, and make the desired changes. In addition to that, don’t forget to constantly check with our website so that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers