QNAP HS-210 TurboNAS QTS Firmware 4.2.0.1118 Download

Posted at November 17, 2024 by PCI-DB Team

QNAP HS-210 TurboNAS QTS Firmware 4.2.0.1118 Description

Change:

- Due to the lack of compatibility with DVB-T TV dongles, the Digital TV Station app will be removed from the QTS 4.2 App Center in certain regions. If compatibility improves, then the app will be reinstated.

Bug Fixes:

- Fixed an issue where the NAS could not enter hibernation mode if a network cable is unplugged.
- Fixed an issue where the NAS would display "The File system is not clean." in the system logs after setting up a scheduled shut down.
- Fixed an issue where the NAS could not enter standby mode is a network cable is unplugged.
- Fixed an issue where NAS drives could not enter standby mode if you change the time setting from "Synchronize with ...." to "Manual setting" in the Control Panel.
- Fixed an issue where the NAS would fail to create scheduled snapshots when using Snapshot Agent Manager.
- Fixed an issue where if the NAS reboots while a RAID is resyncing (RAID6), the RAID will be inactive after the reboot.
- Fixed an issue where File Station fails to copy files larger than 30MB from a local device to OneDrive.
- Fixed an issue where Download Station can still download files with an incorrect proxy setting.
- Fixed an issue where RAID groups would become "inactive" after rebooting the NAS when the QNAP signature on the disks is missing.
- Fixed an issue where the TVS-871T would keep trying to recover from an error if it is connected to 2 Thunderbolt devices at the same time.
- Fixed an issue where the TVS-871T could not establish a Thunderbolt link with a Mac via Thunderbolt cable.
- Fixed an issue where the TVS-871T may not produce a Thunderbolt IP after updating to a new firmware.
- Fixed an issue where a TS-871T will fail to reconnect over Thunderbolt after the NAS wakes up from hibernation mode.
- Fixed an issue where a 10GbE NIC will be disconnected after the NAS goes into hibernation mode.
- Fixed an issue where it will fail to open the Credential Manager on Windows 8.1 when the Domain Controller is enabled on the NAS.
- Fixed an issue where the Next button of "iSCSI Target Only" is disabled while a thin volume is created and its status is "Ready".
- Fixed an issue where the NAS is unable to backup files with the one-touch button when a Sony SBAC-UT100 card reader is in EXT4 or EXT3.

About Network-Attached Storage Updates:

Upgrading the Network-Attached Storage (NAS) firmware can improve the system’s overall performance, stability, and security by adding various fixes for related issues, enhancing existing features (or adding support for new ones), or updating different applications.

Due to the high number of NAS manufacturers, as well as network storage types, installing a new firmware might not be always as easy as it appears – and not too safe either. Failing to perform a software update can cause serious malfunctions to the network storage.

So, before you even consider applying this release, carefully read the installation guide and initiate the process only when you have understood and completely familiarized yourself with all the steps.

Moreover, it would be best if you take into account using a UPS unit (Uninterruptible Power Supply) to perform this task, because no power disruption should affect the upgrade.

With all these aspects in mind, after you have read the installation guide, click the download button to apply this firmware version to your NAS. Remember to check back with our website in order to stay up to speed with the latest releases. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related QNAP Drivers