Intel iMR 3008 ROC Hardware RAID Firmware 24.10.0-0020 Download

Posted at November 21, 2024 by PCI-DB Team

Intel iMR 3008 ROC Hardware RAID Firmware 24.10.0-0020 Description

Versions:

- Firmware 4.600.01-4908
- ROMENV 1.09
- BootBlock 3.07.00.00-0003
- UEFI_Driver 0x06110200(signed)
- FCODE 4.17.08.00
- BIOS 6.28.04.0
- PCLI 1.07.05
- NVDATA 3.1508.01-0008
- Hii 03.17.14.01(signed)
- Ctrl-R 5.13-1101

Changes:

- SCGCQ00864348 - (Closed) - Unexpected AEN of aborting Init During Firmware Down/upgrade
- SCGCQ00894719 - (Closed) - Reconstruction error message "invalid arguments"
- SCGCQ00898140 - (Closed) - Code changes to be made under specific macro for a feature
- SCGCQ00898564 - (Closed) - MSM shows "null x0" to describe port connection to enclosure when multipath is broken
- SCGCQ00900237 - (Closed) - Created VD configuration with PDs released from previous VD erased will lost after next reboot
- SCGCQ00901889 - (Closed) - A hidden VD can be configured as bootdrive
- SCGCQ00901919 - (Closed) - hot remove then hot add of drive in array causes BSOD
- SCGCQ00906997 - (Closed) - forceCacheFlush check was added inappropriately in flush_cache() function
- SCGCQ00907673 - (Closed) - Handling the DIF errors identified by BLADE DMA.
- SCGCQ00908165 - (Closed) - Firmware logs event MR_EVT_CTRL_PR_PROP_CHANGED twice.
- SCGCQ00908885 - (Closed) - Random Write perf drop up to %30 in 2R1 WB RA DCD
- SCGCQ00910433 - (Closed) - HDD LED state indicating Ready-To-Remove is affected by Locate LED on/off
- SCGCQ00913426 - (Closed) - Controller hits MonTask: line 1278 in file ../../raid/1078dma.c after importing PD's with pinned cache
- SCGCQ00914515 - (Closed) - Make sure boot target ID is in valid range
- SCGCQ00916037 - (Closed) - Controller encountered fatal error and was reset during IO and Drive Pull
- SCGCQ00919487 - (Closed) - Handle recon allowed Operation in Firmware
- SCGCQ00925394 - (Closed) - Native config come up as foreign during FW upgrade from non-240 VD FW to 240VD FW.
- SCGCQ00925640 - (Closed) - Set factory default does not reset the modified phy link speed
- SCGCQ00927792 - (Closed) - Particular Drive not discovered in MR6.8, but MR6.7 works fine.
- SCGCQ00928506 - (Closed) - StorCLI show all command triggers datastore disconnect on 3 R5 VD VMware ESXi
- SCGCQ00928699 - (Closed) - Unexpected AEN "Warning Error during boot - Configuration command was not committed, please retry"
- SCGCQ00930593 - Wrong MFI_STAT was returned in PdDcmdSysPdMapAbort()
- SCGCQ00945033 - (Closed) - Add Flush in LdInitPdDone
- SCGCQ00880907 - (Closed) - MR Controller reported fatal error and reset while creating 240 VD
- SCGCQ00883996 - (Closed) - StorCLI/StorCLIO allows to Hide boot drive which is already in Hidden State.
- SCGCQ00890968 - (Closed) - R6 Stays Enabled on TFM
- SCGCQ00904616 - (Closed) - Fails to downgrade hba fw
- SCGCQ00904833 - (Closed) - OOB SLT not displaying Show Configuration Summary for 240 VDs created
- SCGCQ00907123 - (Closed) - CtrlH will halt(no responding) at the end of erase When perform VD erase and delete VD on the 2 VDs simultaneous
- SCGCQ00923103 - (Closed) - Remove environment string for large IO support
- SCGCQ00889734 - (Closed) - StorCLI/StorCLIO allows to Hide drive which is already in Hidden State
- SCGCQ00893368 - (Closed) - Cachecade related 240VD checks needs to account for controller property settings.
- SCGCQ00904466 - (Closed) - MSM shows messages with Error code 240 and no description
- SCGCQ00883612 - (Closed) - Enable sgpioSmpPresenceDetect for all Invader based OEM controllers.
- SCGCQ00935706 - (Closed) - Support Single Write for 4GB 3108 ROMB Design using 8GB Ptolemy for an OEM (MR FW)
- SCGCQ00917409 - (Closed) - MR 6.8: Integrating PL 08.00.09.00 to MR 6.8
- SCGCQ00916738 - (Closed) - MR 6.7: Integrating PL 07.00.10.00 to MR 6.7
- SCGCQ00915869 - (Closed) - Block upgrade and downgrade Firmware when reconstruction is in progress
- SCGCQ00903649 - (Closed) - Support locate bit for locate LED on/off on JBOD PD
- SCGCQ00886938 - (Closed) - when multiple VDs are present VD reconstruction fails, but throws the error message "invalid arguments" in storCLI
- SCGCQ00833849 - (Port_Complete) - FW hung at LogInit: Flushing events from previous boot while running policy change script of Vd and learn cycles.
- SCGCQ00833850 - (Port_Complete) - FW hung at LogInit: Flushing events from previous boot while running policy change script of Vd and learn cycles.
- SCGCQ00833852 - (Port_Complete) - FW hung at LogInit: Flushing events from previous boot while running policy change script of Vd and learn cycles.
- SCGCQ00849554 - (Port_Complete) - Unexpected controller reset during test run
- SCGCQ00876061 - (Port_Complete) - FW hits to MonTask: line 4946 in file ../../raid/ld.c while multipath push pull with patrol read
- SCGCQ00876102 - (Active) - 'Watchdog Timer Exception' followed by FW crash after initiating PD Erase on UG PD, with BG operation & IO's on 64 VD's
- SCGCQ00877435 - (Port_Complete) - Recon VD made "degraded" when the recon pd is pulled out allowing for rebuild once the drive is plugged back in.
- SCGCQ00880776 - (Port_Complete) - Foreign config is not allowed to be cleared if there is preserved cache
- SCGCQ00880870 - (Port_Complete) - MR 6.6.3 "storcli /c0 show all" shows lot of bad block messages in the log
- SCGCQ00880875 - (Port_Complete) - Do not automatically assign boot VD by default
- SCGCQ00880877 - (Port_Complete) - Support Zone Out functionality for OEM expanders
- SCGCQ00880878 - (Port_Complete) - Megaraid Thunderbolt controller reports cache memory size as 0 when no logical drives are present.
- SCGCQ00880880 - (Port_Complete) - StorCli to Message Hide Boot VD User Operation Status correctly
- SCGCQ00882931 - (Port_Complete) - Fault LED behavior in OEM Blades
- SCGCQ00883500 - (Port_Complete) - MonTask after Initiating a Raid Level migration
- SCGCQ00885571 - (Port_Complete) - Windows BSOD when upgrade FW 24.6.0-0040 to 24.8.0-0026 with driver 6.707.08.00
- SCGCQ00885733 - (Port_Complete) - StorCLI/StorCLIO allows to Hide boot drive which is already in Hidden State.
- SCGCQ00885734 - (Port_Complete) - StorCLI/StorCLIO allows to Hide boot drive which is already in Hidden State.
- SCGCQ00886910 - (Port_Complete) - Data TLB error found while running the target reset script with multipath cable pull-push operation
- SCGCQ00889826 - (Port_Complete) - Add support for show SBR command
- SCGCQ00889922 - (Port_Complete) - FW hung at LogInit: Flushing events from previous boot while running policy change script of Vd and learn cycles.
- SCGCQ00893924 - (Port_Complete) - IO halts on JBODs with read/write error when the target drives are reset via MFI or MPT path on Linux distro
- SCGCQ00895476 - (Port_Complete) - FW breaks MonTask: line 245 in file ../../raid/1078int.c with IOs on max VD configured and BGOps
- SCGCQ00898359 - (Port_Complete) - 'Watchdog Timer Exception' followed by FW crash after initiating PD Erase on UG PD, with BG operation & IO's on 64 VD's
- SCGCQ00898397 - (Port_Complete) - Firmware does not log controller property change event for enabling/disabling 240VD feature
- SCGCQ00898473 - (Port_Complete) - Firmware breaks to montask while importing the Foreign Config.
- SCGCQ00898730 - (Port_Complete) - Core 0 exception seen while trying to import foreign configuration with pinned cache present.
- SCGCQ00898752 - (Port_Complete) - FW downgrade fails with IOs and BGops .
- SCGCQ00898758 - (Port_Complete) - Controller killed on issuing OCR from StorCLI after disabling it from OS.
- SCGCQ00898762 - (Port_Complete) - TTY log dump is not persistent for multiple boots.
- SCGCQ00898773 - (Port_Complete) - Add sanity check for iPtr and rPtr after restore is completed.
- SCGCQ00898780 - (Port_Complete) - One deletion of CCVD FW displays incorrect CCVD target id and remaining CacheCade size on the system
- SCGCQ00898790 - (Port_Complete) - sasPortNumberValid bit does not get updated in CtrlR
- SCGCQ00898808 - (Port_Not_Required) - Remove checkSysPwrStatus() and processSysPwrReturn() functions.
- SCGCQ00898880 - (Port_Complete) - Kill adapter during test run
- SCGCQ00899333 - (Port_Complete) - Controller discovery failed due to pending Boot messages, adapter at baseport not responding.
- SCGCQ00899474 - (Port_Complete) - On receiving CACHE_FLUSH_DCMD, set forceCacheflush flag to 1 to flush the cache
- SCGCQ00904475 - (Port_Complete) - Unexpcted AEN of aborting Init During Firmware Down/upgrade
- SCGCQ00905418 - (Port_Complete) - Controller encountered fatal error and was reset under heavy IOs and background operations.
- SCGCQ00905782 - (Port_Complete) - FW breaks MonTask: line 245 in file ../../raid/1078int.c with IOs on max VD configured and BGOps
- SCGCQ00907679 - (Port_Complete) - on creating 240VD and rebooting the server, FW breaks into montask.
- SCGCQ00907680 - (Port_Complete) - on creating 240VD and rebooting the server, FW breaks into montask.
- SCGCQ00907682 - (Port_Complete) - LUID gets changed during foreign import from non-240VD FW to 240VD FW
- SCGCQ00908903 - (Port_Complete) - LUID gets changed during foreign import from non-240VD FW to 240VD FW
- SCGCQ00909037 - (Port_Complete) - fails to downgrade hba fw
- SCGCQ00910375 - (Port_Complete) - OOB SLT not displaying Show Configuration Summary for 240 VDs created
- SCGCQ00910389 - (Port_Complete) - Firmware logs event MR_EVT_CTRL_PR_PROP_CHANGED twice.
- SCGCQ00910569 - (Port_Complete) - After reboot imported 4K drive R0 is not visible
- SCGCQ00911211 - (Port_Complete) - Created VD configuration with PDs released from previous VD erased will lost after next reboot
- SCGCQ00911213 - (Port_Complete) - Created VD configuration with PDs released from previous VD erased will lost after next reboot
- SCGCQ00911215 - (Port_Complete) - Created VD configuration with PDs released from previous VD erased will lost after next reboot
- SCGCQ00911773 - (Port_Complete) - Handling Functional Level Reset (FLR) .
- SCGCQ00911790 - (Active) - Reduce Command Block Latency during Background Operations
- SCGCQ00922541 - (Port_Complete) - Importing 240 VD foreign configuration leads to FW Crash
- SCGCQ00922542 - (Port_Complete) - as been observed that the firmware retires the FPIO timed out IOs for 3 times instead of the reduced count to
- SCGCQ00922716 - (Port_Complete) - Controller encountered fatal error and was reset under heavy IOs and background operations.
- SCGCQ00923113 - (Port_Complete) - hot remove then hot add of drive in array causes BSOD
- SCGCQ00923405 - (Port_Complete) - Configuration creation on Controller fails after creation of a CC VD followed by JBOD creation.
- SCGCQ00929473 - (Port_Complete) - Handling the DIF errors identified by BLADE DMA.
- SCGCQ00934617 - (Port_Complete) - RAID 10 PI error message "SAS core detected EEDP error in application tag".
- SCGCQ00934619 - (Port_Complete) - CRC mismatch and invalid log event found while querying for Controller properties and learn cycle in parallel.
- SCGCQ00934711 - (Port_Complete) - CtrlH will halt(no responding) at the end of erase When perform VD erase and delete VD on the 2 VDs simultaneous
- SCGCQ00873095 - (Port_Complete) - FW allows CCVD deletion with pinned windows
- SCGCQ00873096 - (Port_Complete) - FW allows CCVD deletion with pinned windows
- SCGCQ00880876 - (Port_Complete) - Support Zone In functionality for OEM expanders
- SCGCQ00883175 - (Port_Complete) - Consistency Check running under high I/O load causing VMWare DataStore disconnect on RAID 5 VDs
- SCGCQ00898761 - (Port_Complete) - FW breaks MonTask: line 245 in file ../../raid/1078int.c with IOs on max VD configured and BGOps
- SCGCQ00899818 - (Port_Complete) - MonTask: line 1280 in file ../../raid/1078dma.c. DCDB cmd timed out
- SCGCQ00905494 - (Port_Complete) - fails to downgrade hba fw
- SCGCQ00906991 - (Port_Complete) - On receiving CACHE_FLUSH_DCMD, set forceCacheflush flag to 1 to flush the cache
- SCGCQ00908347 - (Port_Complete) - Copyback fails to start and causes a FW fault
- SCGCQ00908894 - (Port_Complete) - LUID gets changed during foreign import from non-240VD FW to 240VD FW
- SCGCQ00908904 - (Port_Complete) - on creating 240VD and rebooting the server, FW breaks into montask.
- SCGCQ00914742 - (Port_Complete) - Medium error correction events were not reported
- SCGCQ00917202 - (Active) - During long run reboot test, FW eventually reports "Disabling writes to flash due to a critical error"
- SCGCQ00922595 - (Port_Complete) - Cachecade related 240VD checks needs to account for controller property settings.
- SCGCQ00923292 - (Port_Complete) - Remove environment string for large IO support
- SCGCQ00929474 - (Port_Complete) - Controller encountered fatal error and was reset during IO and Drive Pull
- SCGCQ00880864 - (Port_Complete) - StorCLI reports success on 4MB MR flash on iMR which fails after reset - (SCGCQ00870439)
- SCGCQ00880872 - (Port_Complete) - Disable FLR support in MR FW to address VMware guest VM abrupt shutdown issue
- SCGCQ00881276 - (Port_Complete) - Megaraid_sas driver fails to communicate with the FW and fails to discover any disks attached
- SCGCQ00885732 - (Port_Complete) - StorCLI/StorCLIO allows to Hide boot drive which is already in Hidden State.
- SCGCQ00911685 - (Active) - wave4scrum pdisk state remains as ready even after creating a vdisk on that
- SCGCQ00942794 - (Port_Complete) - Chaos report DC after rebuild complete on R6 with SAS SSD
- SCGCQ00880866 - (Port_Complete) - Handling NVRAM migration for Patrol Read
- SCGCQ00833851 - (Port_Complete) - FW hung at LogInit: Flushing events from previous boot while running policy change script of Vd and learn cycles.
- SCGCQ00922681 - (Port_Complete) - Sanity check for handling the cases where event length comes up as zero/ rPtr goes beyond iptr
- Numerous changes for specific customers
- SCGCQ00932071 - (Port_Complete) - Inconsistency across apps for retention time in HII.
- SCGCQ00914259 - (Port_Complete) - HII Dashboard doesn't refresh enclosure and drive counter when an enclosure with foreign config is disconnected
- SCGCQ00897835 - (Port_Complete) - HII Missing WB Option
- SCGCQ00905879 - (Port_Complete) - MegaRAID Firmware Information not Displayed Under IMM
- SCGCQ00932045 - (Port_Complete) - With pinned cache HII hangs while trying to enter "cache and memory" tab under advanced controller properties
- SCGCQ00932117 - (Port_Complete) - DATA TLB Error(MonTask: line 245 in file) on enabling JBOD from HII while running patrol read.
- SCGCQ00931887 - (Port_Complete) - In-correct associated drive group number showing for DHS drive
- SCGCQ00931890 - (Port_Complete) - 'Next Learn Cycle Time' & 'Learn Period' not displayed when battery supports transparent learn.
- SCGCQ00911105 - (Port_Complete) - HII Firmware Update Option
- SCGCQ00931921 - (Port_Complete) - Display NVRAM Size only if hwpresent.nvram is present
- SCGCQ00907053 - (Port_Complete) - Apply button is active in Ctrl Mgnt when traversed from Rebuild rate to BGI rate
- SCGCQ00916359 - (Port_Complete) - Manage dedicated hotspare is available for Cachecade DG and assign hotspare fails at the end
- SCGCQ00916352 - (Port_Complete) - Expand size link is enabled even though available size is 0 in Cachecade diskgroup
- SCGCQ00914214 - (Port_Complete) - Error code "Unknown" for setting hidden VD as boot VD in Ctrl-R
- SCGCQ00933861 - (Port_Complete) - CTRL-H Missing WB Option
- SCGCQ00897838 - (Port_Complete) - CTRL-H Missing WB Option
- SCGCQ00914218 - (Port_Complete) - No error message for failure of Disable SSD Caching of an offline VD
- SCGCQ00931889 - (Port_Complete) - CTRL_H showing on-board memory size when memory is not present
- SCGCQ00932144 - (Port_Complete) - storcli command shows Failure on SWR for command "storcli /c0 show all"
- SCGCQ00932043 - (Port_Complete) - 'Next Learn Cycle Time' & 'Learn Period' not displayed when battery supports transparent learn.

This download is valid for the products listed below:

- Intel RAID Controller RS3WC080
- Intel Integrated RAID Module RMS3HC080
- Intel Server Board S2600CW2
- Intel Server Board S2600CWT
- Intel Server Board S2600CW2S
- Intel Server Board S2600CWTS
- Intel Server Board S2600CWTSR
- Intel Server Board S2600CWTR
- Intel Server Board S2600CW2SR
- Intel Server Board S2600CW2R

About SATA / AHCI / RAID Controllers:

When enabled by appropriate software, the SATA controller (RAID or AHCI) is properly recognized by the system and all of its features are made accessible.

In addition to that, the computer will have the ability to read all adapter characteristics, such as model and manufacturer, and will also be able to manage physical disk drives through the controller’s interface.

If you wish to apply this package, all you have to do is to make sure that the current release is compatible with both your adapter model and your operating system, and then to get the downloadable software. Extract it if necessary, run the available setup, and follow the on-screen instructions for a complete installation.

When finished, remember to perform a system reboot to make sure that all changes take effect properly. Please remember that, even though other OSes might also be compatible, we do not recommend installing this software on platforms other than the specified ones.

That being said, click the download button, get the package and apply it on your computer. Moreover, constantly check with our website to stay up to date with latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers