Allen & Heath Qu-PAC Digital Mixer Firmware 1.82.4387 Download

Posted at December 22, 2024 by PCI-DB Team

Allen & Heath Qu-PAC Digital Mixer Firmware 1.82.4387 Description

Issues fixed:

- ID_2097: Stereo Groups 5/6 and 7/8 would not output any audio when set to Mix channels and patched to a dSNAKE AudioRack.

Improvements:

- ID_2126: Improved response of the AMM gain metering.

Known Issues - Qu-Drive:

- An unformatted USB key plugged into Qu-Drive is not always recognised by the mixer. You may need to first format the USB key on a PC or Mac (FAT 32), then try to format it again on the Qu mixer.
- Loss of power or unplugging a USB key or hard drive during multi-track or stereo record may result in the current recording being lost.

Known issues – other:

- Turning off the mixer whilst connected to a PC may lock up the PC USB system.

Known issues – Qu-You:

- Recalling a Scene or Show whilst continuously moving a group wheel on the app may result in the send levels of the new Scene / Show being overwritten by the app.
- Operating devices running Qu-You out of Wi-Fi range or with poor Wi-Fi connection may cause degraded system responsiveness and loss of connection of all connected Wi-Fi devices. For best performance ensure good wireless coverage.

About DJ Mixers:

Updating the mixer’s firmware version can add support for newly developed features (or improve existing ones), enhance audio quality and transition effects, resolve different problems such as those regarding various noises heard in certain situations, and many other related improvements.

However, before downloading this package, go to the unit’s system information and make sure that the currently installed firmware isn’t either newer or matches this release. Moreover, you should know that an update failure might seriously damage the mixer’s software, so it is vital that you are familiar with the installation steps.

As for applying this release, you must transfer the downloadable package (or its content) to the mixer via any available methods, and power up the unit through various key combinations in order to enter update mode (make sure you read the product’s user guide).

This said, if you consider installing this release and you’re positive you have all the knowledge you need for a successful upgrade, download the package, and apply it to your mixer. Check with our website constantly so that you don’t miss any update that can improve your device. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Others Drivers