Gigabyte GA-EP41-UD3L (rev. 3.3) Intel Chipset Driver 9.1.2.1007 Download
Posted at November 21, 2024 by PCI-DB Team
Install Driver Automatically Device Name | Gigabyte GA-EP41-UD3L (rev. 3.3) Intel Chipset Driver 9.1.2.1007 |
---|
Category | Motherboard |
---|
Manufacturer | Intel |
---|
File Size | 1.2 MB |
---|
Supported OS | Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit |
---|
Gigabyte GA-EP41-UD3L (rev. 3.3) Intel Chipset Driver 9.1.2.1007 Description
CPU
- Support for an Intel Core 2 Extreme processor/ Intel Core 2 Quad processor/Intel Core 2 Duo processor/ Intel Pentium processor/Intel Celeronprocessor in the LGA775 package
(Go to GIGABYTE's website for the latest CPU support list.)
- L2 cache varies with CPU
Front Side Bus
- 1333/1066/800 MHz FSB
Chipset
- North Bridge: Intel G41 Express Chipset
- South Bridge: Intel ICH7
Memory
- 4 x 1.8V DDR2 DIMM sockets supporting up to 8 GB of system memory
- Dual channel memory architecture
- Support for DDR2 1066(OC)/800/667 MHz memory modules
(Go to GIGABYTE's website for the latest memory support list.)
* Because of Intel chipset limitation, please use single-side memory module if four memory modules are to be installed.
Audio
- Realtek ALC888 codec
- High Definition Audio
- 2/4/5.1/7.1-channel
- Support for S/PDIF In/Out
- Support for CD In
LAN
- RTL8111C/D(L) chip (10/100/1000 Mbit)
Expansion Slots
- 1 x PCI Express x16 slot, running at x16
- 3 x PCI Express x1 slots
- 3 x PCI slots
Storage Interface
South Bridge:
- 1 x IDE connector supporting ATA-100/66/33 and up to 2 IDE devices
- 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices
iTE IT8718 chip:
- 1 x floppy disk drive connector supporting up to 1 floppy disk drive
USB
- Integrated in the South Bridge
- Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)
Internal I/O Connectors
- 1 x 24-pin ATX main power connector
- 1 x 4-pin ATX 12V power connector
- 1 x floppy disk drive connector
- 1 x IDE connector
- 4 x SATA 3Gb/s connectors
- 1 x CPU fan header
- 2 x system fan headers
- 1 x power fan header
- 1 x front panel header
- 1 x front panel audio header
- 1 x CD In connector
- 1 x S/PDIF In header
- 1 x S/PDIF Out header
- 2 x USB 2.0/1.1 headers
- 1 x power LED header
- 1 x chassis intrusion header
- 1 x clearing CMOS jumper
Back Panel Connectors
- 1 x PS/2 keyboard port
- 1 x PS/2 mouse port
- 1 x parallel port
- 1 x coaxial S/PDIF Out connector
- 1 x optical S/PDIF Out connector
- 1 x serial port
- 4 x USB 2.0/1.1 ports
- 1 x RJ-45 port
- 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/ Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller
- iTE IT8718 chip
H/W Monitoring
- System voltage detection
- CPU/System temperature detection
- CPU/System/Power fan speed detection
- CPU overheating warning
- CPU/System/Power fan fail warning
- CPU/System fan speed control
BIOS
- 2 x 8 Mbit flash
- Use of licensed AWARD BIOS
- Support for DualBIOS
- PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features
- Support for @BIOS
- Support for Q-Flash
- Support for Virtual Dual BIOS
- Support for Download Center
- Support for Xpress Install
- Support for Xpress Recovery2
- Support for EasyTune
- Support for Dynamic Energy Saver Advanced
- Support for Time Repair
- Support for Q-Share
Bundle Software
- Norton Internet Security (OEM version)
Operating System
- Support for Microsoft Windows Vista/XP
Form Factor
- ATX Form Factor; 30.5cm x 21.0cm
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer. It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Related Intel Drivers