Gigabyte GA-946-DS3 (rev. 3.3) Intel Display Driver 6.14.10.4704 for XP Download
Posted at December 3, 2024 by PCI-DB Team
Install Driver Automatically| Device Name | Gigabyte GA-946-DS3 (rev. 3.3) Intel Display Driver 6.14.10.4704 for XP |
|---|
| Category | Graphics Board |
|---|
| Manufacturer | INTEL |
|---|
| File Size | 6.8 MB |
|---|
| Supported OS | Windows 2K ,Windows XP |
|---|
Gigabyte GA-946-DS3 (rev. 3.3) Intel Display Driver 6.14.10.4704 for XP Description
CPU
- Support for an IntelCore 2 Extreme processor/ Intel Core 2 Quad processor/Intel Core 2 Duo processor/ Intel Pentium processor Extreme Edition/Intel Pentium D processor/ Intel Pentium 4 processor Extreme Edition/Intel Pentium 4 processor/ Intel Celeron D processor in the LGA 775 package
- Support for Intel Hyper-Threading Technology
- L2 cache varies with CPU
Front Side Bus
- 1066/800/533 MHz FSB
Chipset
- North Bridge: Intel 946GZ Express Chipset
- South Bridge: Intel ICH7
Memory
- 4 x 1.8V DDR2 DIMM sockets supporting up to 4 GB of system memory
- Dual channel memory architecture
- Support for DDR2 667/533 MHz memory modules
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.
Audio
- Realtek ALC889A codec
- High Definition Audio
- 2/4/5.1/7.1-channel
- Support for S/PDIF In/Out
- Support for CD In
LAN
- RTL 8111B chip (10/100/1000 Mbit)
Expansion Slots
- 1 x PCI Express x16 slot
- 3 x PCI Express x1 slots
- 3 x PCI slots
Storage Interface
South Bridge:
- 1 x floppy disk drive connector supporting up to 1 floppy disk drive
- 1 x IDE connector supporting ATA-100/66/33 and up to 2 IDE devices
- 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices
USB
- Integrated in the South Bridge
- Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)
Internal I/O Connectors
- 1 x 24-pin ATX main power connector
- 1 x 4-pin ATX 12V power connector
- 1 x floppy disk drive connector
- 1 x IDE connector
- 4 x SATA 3Gb/s connectors
- 1 x CPU fan header
- 1 x system fan header
- 1 x power fan header
- 1 x North Bridge fan header
- 1 x front panel header
- 1 x front panel audio header
- 1 x CD In connector
- 1 x S/PDIF In/Out header
- 2 x USB 2.0/1.1 headers
- 1 x chassis intrusion header
- 1 x power LED header
Back Panel Connectors
- 1 x PS/2 keyboard port
- 1 x PS/2 mouse port
- 1 x parallel port
- 1 x serial port
- 4 x USB 2.0/1.1 ports
- 1 x RJ-45 port
- 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller
- iTE IT8718 chip
H/W Monitoring
- System voltage detection
- CPU/System temperature detection
- CPU/System/Power fan speed detection
- CPU overheating warning
- CPU/System/Power fan fail warning
- CPU fan speed control
BIOS
- 1 x 4 Mbit flash
- Use of licensed AWARD BIOS
- PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b
Unique Features
- Support for @BIOS
- Support for Download Center
- Support for Q-Flash
- Support for EasyTune
- Support for Xpress Install
- Support for Xpress Recovery2
- Support for Virtual Dual BIOS
Bundle Software
- Norton Internet Security (OEM version)
Operating System
- Support for Microsoft Windows Vista/XP/2000
Form Factor
- ATX Form Factor; 30.5cm x 21.0cm
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer. It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Related INTEL Drivers