Gigabyte GA-G41M-Combo (rev. 1.4) Intel Display Driver 6.14.10.5259 for XP Download
Posted at November 21, 2024 by PCI-DB Team
Install Driver Automatically| Device Name | Gigabyte GA-G41M-Combo (rev. 1.4) Intel Display Driver 6.14.10.5259 for XP |
|---|
| Category | Graphics Board |
|---|
| Manufacturer | INTEL |
|---|
| File Size | 11 MB |
|---|
| Supported OS | Windows XP |
|---|
Gigabyte GA-G41M-Combo (rev. 1.4) Intel Display Driver 6.14.10.5259 for XP Description
CPU
- Support for an Intel Core 2 Extreme processor/Intel Core 2 Quad processor/Intel Core 2 Duo processor/Intel Pentium processor/Intel Celeron processor in the LGA775 package
- L2 cache varies with CPU
Front Side Bus
- 1333/1066/800 MHz FSB
Chipset
- North Bridge: Intel G41 Express Chipset
- South Bridge: Intel ICH7
Memory
DDR3:
- 2 x 1.5V DDR3 DIMM sockets supporting up to 8 GB of system memory
- Support for DDR3 1333(O.C.)/1066/800 MHz memory modules
DDR2:
- 2 x 1.8V DDR2 DIMM sockets supporting up to 8 GB of system memory
* Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
- Support for DDR2 1066(O.C.)/800/667 MHz memory modules
Dual channel memory architecture
(Note: Mixed mode, populating DDR2 and DDR3 memory modules simultaneously is not supported. Please refer "Memory Support List" for the latest supported memory speeds and memory modules.)
Onboard Graphics
North Bridge:
- 1 x D-Sub port
Audio
- Realtek ALC887 codec
- High Definition Audio
- 2/4/5.1-channel
LAN
- Atheros GbE LAN chip (10/100/1000 Mbit)
Expansion Slots
- 1 x PCI Express x16 slot, running at x16
- 1 x PCI Express x1 slot
- 2 x PCI slots
Storage Interface
South Bridge:
- 1 x IDE connector supporting ATA-100/66/33 and up to 2 IDE devices
- 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices
iTE I/O Controller Chip:
- 1 x floppy disk drive connector supporting up to 1 floppy disk drive
USB
South Bridge:
- Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)
Internal I/O Connectors
- 1 x 24-pin ATX main power connector
- 1 x 4-pin ATX 12V power connector
- 1 x floppy disk drive connector
- 1 x IDE connector
- 4 x SATA 3Gb/s connectors
- 1 x CPU fan header
- 1 x system fan header
- 1 x front panel header
- 1 x front panel audio header
- 2 x USB 2.0/1.1 headers
- 1 x clear CMOS jumper
Back Panel Connectors
- 1 x PS/2 keyboard port
- 1 x PS/2 mouse port
- 1 x parallel port
- 1 x serial port
- 1 x D-Sub port
- 4 x USB 2.0/1.1 ports
- 1 x RJ-45 port
- 3 x audio jacks (Line In/Line Out/Microphone)
I/O Controller
- ITE 8720
H/W Monitoring
- System voltage detection
- CPU temperature detection
- CPU/System fan speed detection
- CPU overheating warning
- CPU/System fan fail warning
- CPU fan speed control
* Whether the CPU fan speed control function is supported will depend on the CPU cooler you install.
BIOS
- 2 x 8 Mbit flash
- Use of licensed AWARD BIOS
- Support for DualBIOS
- PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features
- Support for @BIOS
- Support for Q-Flash
- Support for Xpress BIOS Rescue
- Support for Download Center
- Support for Xpress Install
- Support for Xpress Recovery2
- Support for EasyTune
* Available functions in EasyTune may differ by motherboard model.
- Support for Easy Energy Saver
* Due to the hardware limitation, you must install the Intel Core 2 Extreme/Core 2 Quad/Core 2 Duo/Pentium Dual-Core/Celeron Dual-Core/Celeron 400 Series CPU to enable support for Easy Energy Saver.
- Support for SMART Recovery
- Support for Auto Green
- Support for ON/OFF Charge
- Support for Q-Share
Bundle Software
- Norton Internet Security (OEM version)
Operating System
- Support for Microsoft Windows 7/Vista/XP
Form Factor
- Micro ATX Form Factor; 24.4cm x 21.0cm
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer. It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Related INTEL Drivers