Gigabyte GA-G41M-Combo (rev. 1.4) BIOS F4 Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Gigabyte GA-G41M-Combo (rev. 1.4) BIOS F4
Category	Bios
Manufacturer	Gigabyte
File Size	593 KB
Supported OS	Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit

Gigabyte GA-G41M-Combo (rev. 1.4) BIOS F4 Description

CPU
- Support for an Intel Core 2 Extreme processor/ Intel Core 2 Quad processor/Intel Core 2 Duo processor/ Intel Pentium processor/Intel Celeron processor in the LGA775 package (Go to GIGABYTE's website for the latest CPU support list.)
- L2 cache varies with CPU

Front Side Bus
- 1333/1066/800 MHz FSB

Chipset
- North Bridge: Intel G41 Chipset
- South Bridge: Intel ICH7

Memory
DDR3:
- 2 x 1.5V DDR3 DIMM sockets supporting up to 8 GB of system memory (Note 1)
- Dual channel memory architecture
- Support for DDR3 1333(O.C.)/1066/800 MHz memory modules

DDR2:
- 2 x 1.8V DDR2 DIMM sockets supporting up to 8 GB of system memory (Note 1)
- Dual channel memory architecture
- Support for DDR2 1066(O.C.)/800/667 MHz memory modules

(Note: Mixed mode, populating DDR2 and DDR3 memory modules simulta- neously is not supported. Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)

Onboard Graphics
North Bridge:
- 1 x D-Sub port

Audio
- VIA VT1708S codec
- High Definition Audio
- 2/4/5.1-channel
- Support for S/PDIF Out
- Support for CD In

LAN
- 1 x Atheros AR8151 chip (10/100/1000 Mbit)

Expansion Slots
- 1 x PCI Express x16 slot, running at x16
- 1 x PCI Express x1 slot
- 2 x PCI slots

Storage Interface
South Bridge:
- 1 x IDE connector supporting ATA-100/66/33 and up to 2 IDE devices
- 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices

iTE IT8718F chip:
- 1 x floppy disk drive connector supporting up to 1 floppy disk drive

USB
South Bridge:
- Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)

Internal I/O Connectors
- 1 x 24-pin ATX main power connector
- 1 x 4-pin ATX 12V power connector
- 1 x floppy disk drive connector
- 1 x IDE connector
- 4 x SATA 3Gb/s connectors
- 1 x CPU fan header
- 1 x system fan header
- 1 x front panel header
- 1 x front panel audio header
- 1 x CD In connector
- 1 x S/PDIF Out header
- 2 x USB 2.0/1.1 headers
- 1 x serial port header
- 1 x clearing CMOS jumper

Back Panel Connectors   

- 1 x PS/2 keyboard port
- 1 x PS/2 mouse port
- 1 x parallel port
- 1 x serial port
- 1 x D-Sub port
- 4 x USB 2.0/1.1 ports
- 1 x RJ-45 port
- 3 x audio jacks (Line In/Line Out/Microphone)

I/O Controller
- iTE IT8718F

H/W Monitoring
- System voltage detection
- CPU/System temperature detection
- CPU/System fan speed detection
- CPU overheating warning
- CPU/System fan fail warning
- CPU fan speed control (Note 2)

BIOS
- 2 x 8 Mbit flash
- Use of licensed AWARD BIOS
- Support for DualBIOS
- PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b

Unique Features
- Support for @BIOS
- Support for Q-Flash
- Support for Xpress BIOS Rescue
- Support for Download Center
- Support for Xpress Install
- Support for Xpress Recovery2
- Support for EasyTune (Note 3)
- Support for Easy Energy Saver (Note 4)
- Support for SMART Recovery
- Support for Auto Green
- Support for ON/OFF Charge
- Support for Q-Share

Bundle Software
- Norton Internet Security (OEM version)

Operating System
- Support for Microsoft Windows 7/Vista/XP

Form Factor
- Micro ATX Form Factor; 24.4cm x 21.0cm

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Gigabyte Drivers