VIZIO S3820w-C0 Sound Stand Firmware Download

Posted at December 3, 2024 by PCI-DB Team

VIZIO S3820w-C0 Sound Stand Firmware Description

Fixes:

This update addresses moments where your Sound Bar becomes unresponsive to remote control commands suddenly and a power cycle (unplug power and plug back in) is necessary to remedy the problem.

This update is only targeted to S3821w-C0 or S3820w-C0 Sound Bars that have a V2 or V3 label adhered to the serial number label on the back of the sound bar. If your sound bar does not have a V2 or V3 label then this update is not necessary.

Updating the Sound Stand firmware:

1. Download the Firmware file to the computer.
2. Plug the USB thumb drive into the computer and format it as FAT or FAT32.
3. Copy the downloaded firmware file (update.bin) to the root directory of the USB thumb drive, then safely eject and unplug it from the computer.
4. With the help of another person, unplug and remove the TV from on top of (or over) the Sound Stand.
5. Turn on the Sound Stand and unplug it from the power outlet.
6. Plug the USB thumb drive into the USB port on the back of the Sound Stand.
7. Reconnect the Sound Stand to the power outlet with the power cable.
8. LEDs 1 and 2 will light up, indicating that the update on the USB thumb drive has been found.
9. LEDs 1, 3, and 4 will light up, indicating that the firmware update is in progress. Do not unplug the power cable or remove the USB thumb drive from the Sound Stand. The LEDs will turn off when the update is completed.
10. Unplug the USB thumb drive from the Sound Stand.
11. Unplug the Sound Stand from the power outlet and plug it back in again.
12. The firmware update procedure is complete.
13. With the help of another person, reconnect the TV and place it back on/over the Sound Stand.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Other Drivers