ASUS P8B75-V Intel Chipset Driver 9.4.0.1016 for Windows 8 Download

Posted at November 21, 2024 by PCI-DB Team

ASUS P8B75-V Intel Chipset Driver 9.4.0.1016 for Windows 8 Description

Specifications:

CPU:
- Intel Socket 1155 for 3rd/2nd Generation Core i7/Core i5/Core i3/Pentium/Celeron Processors
- Supports Intel 22 nm CPU
- Supports Intel 32 nm CPU
- Supports Intel Turbo Boost Technology 2.0

Chipset:

- Intel B75

Memory:

- 4 x DIMM, Max. 32GB, DDR3 2200(O.C.) / 2133(O.C.) / 2000(O.C.) / 1866(O.C.) / 1600 / 1333 / 1066 MHz Non-ECC, Un-buffered Memory
- Dual Channel Memory Architecture
- Supports Intel Extreme Memory Profile (XMP)

Graphics:

- Integrated Graphics Processor
- Multi-VGA output support: DVI/RGB ports
- Supports DVI with max. resolution 1920 x 1200 @ 60 Hz
- Supports RGB with max. resolution 2048 x 1536 @ 75 Hz
- Maximum shared memory of 1696 MB
- Supports Intel HD Graphics

Multi-GPU Support:

- Supports AMD Quad-GPU CrossFireX Technology

Expansion Slots:

- 1 x PCIe 3.0/2.0 x16 (blue)
- 1 x PCIe 2.0 x16 (x4 mode, black)
- 2 x PCIe 2.0 x1
- 3 x PCI

Storage:

- Intel B75 chipset
- 1 x SATA 6Gb/s port(s), gray
- 5 x SATA 3Gb/s port(s), blue
- Supports Intel Rapid Start Technology, Intel Smart Connect Technology

LAN:

- Realtek 8111E , 1 x Gigabit LAN Controller(s)

Audio:

- Realtek ALC887-VD2 8-Channel High Definition Audio CODEC
- Supports: Jack-detection, Multi-streaming, Front Panel Jack-retasking
- Optical S/PDIF out port(s) at back panel

USB Ports:

- Intel B75 chipset: 4 x USB 3.0 port(s) (2 at back panel, blue, 2 at mid-board)
- Intel B75 chipset: 8 x USB 2.0 port(s) (4 at back panel, black, 4 at mid-board)

Back I/O Ports:

- 1 x PS/2 keyboard (purple)
- 1 x PS/2 mouse (green)
- 1 x DVI
- 1 x D-Sub
- 1 x LAN (RJ45) port(s)
- 2 x USB 3.0
- 4 x USB 2.0
- 3 x Audio jack(s)

Internal I/O Ports:

- 1 x USB 3.0 connector(s) support(s) additional 2 USB 3.0 port(s)
- 2 x USB 2.0 connector(s) support(s) additional 4 USB 2.0 port(s)
- 1 x COM port(s) connector(s)
- 1 x SATA 6Gb/s connector(s)
- 5 x SATA 3Gb/s connector(s)
- 1 x CPU Fan connector(s)
- 2 x Chassis Fan connector(s)
- 1 x S/PDIF out header(s)
- 1 x 24-pin EATX Power connector(s)
- 1 x 8-pin ATX 12V Power connector(s)
- 1 x parallel port connector(s)
- 1 x Front panel audio connector(s) (AAFP)
- 1 x System panel(s)
- 1 x MemOK! button(s)
- 1 x Clear CMOS jumper(s)

Form Factor:

- ATX Form Factor
- 12 inch x 8.6 inch ( 30.5 cm x 21.9 cm )

About Chipset Drivers:

Windows OS automatically installs a generic driver that allows computers to recognize basic motherboard functions. However, to make use of all board components, appropriate chipset drivers must be applied.

If you install this package, the system will receive related information regarding the chipset. Also, this step might improve compatibility and bus transfer speeds, add various changes for sleep state behavior, power saving functionality and others, or include support for new features.

To apply this release, simply make sure your system configuration is supported by this package, get the file, run the available setup, and follow the on-screen instructions. Bear in mind that installing inappropriate chipset drivers can cause computers to malfunction.

In addition to that, do perform a system restart after you have completely applied the present release so that all changes take effect. Despite the off-chance that other OSes might be compatible, we do not recommend installing any software on platforms other than the highlighted ones.

That being said, check the supported platforms, click the download button and apply the chipset driver. Moreover, don’t forget to check with our website as often as possible to stay up to date with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers