Aztech HW550-3G Router Firmware 201.106.3-025 Download

Posted at December 22, 2024 by PCI-DB Team

Aztech HW550-3G Router Firmware 201.106.3-025 Description

Fixes:

Additional support for following USB 3G modems
1. Huawei E1762
2. Huawei E1552
3. ZTE MF110
4. ZTE MF100

Firmware Upgrade Instructions

Note: Please use WIRED connection (Ethernet cable) in upgrading the firmware.

1. Download the latest firmware.
2. Double click Setup to install the Firmware Upgrade utility software.
3. InstallShield Wizard will appear click Next to proceed with the installation.
4. Click Next to save the Firmware Upgrade utility file else click Browse to choose a different folder.
5. Click Finish to complete Firmware Upgrade utility installation.
6. Double click HW550 Firmware Upgrade icon to launch the Firmware Upgrade utility
7. Connect your PC to any of the available Ethernet LAN ports of your
HW550-3G using an Ethernet cable then click Start.
8. Click Exit to close the Firmware Upgrade utility

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Aztech Drivers