Epson PowerLite Pro Cinema LS10000 Projector Firmware 2.116 Download

Posted at April 29, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Epson PowerLite Pro Cinema LS10000 Projector Firmware 2.116
Category	Firmware
Manufacturer	Other
File Size	33 MB
Supported OS	OS Independent

Epson PowerLite Pro Cinema LS10000 Projector Firmware 2.116 Description

This firmware update adds performance improvements to the Epson PowerLite Pro Cinema LS9600e and LS10000 projectors. We recommend you download and install this update prior to installing the projector.

Notes:

- Do not turn off the projector or computer while this update is being applied.
- Do not rename the firmware (.bin) file after downloading.

Installing the firmware

1. Turn off the projector and let it complete the cool down cycle (approximately 20 seconds), then unplug the power cable.
2. On your computer, download the firmware package .
3. Connect a Mini-USB cable to your projector’s Service port and the other end to a USB port on your computer.
4. Connect the power cord to the projector while holding down the projector’s P power button.
5. When the power and status lights turn solid blue and the Laser and Temp lights turn solid orange, release the projector’s P power button. Your computer detects the projector as a removable disk and automatically displays the EPSON_PJ folder.
Note: If the folder does not appear, open My Computer, Computer, or a new Finder screen and select EPSON_PJ.
6. On your computer, extract the firmware package and copy only the firmware file for your model into the EPSON_PJ folder.
LS9600e: EPSONPJ_LS9600e_v2116.bin
LS10000: EPSONPJ_LS10000_v2115.bin
Note: Do not rename the firmware file. If the name or extension of the firmware file is changed, the firmware update will not start. Do not copy any other files or folders into the EPSON_PJ folder.
7. Safely eject the projector from your computer and disconnect the Mini-USB cable from the projector. After a moment, the projector’s lights flash and the firmware update starts.
Caution: Do not disconnect power from the projector while the firmware is updating. Interrupting the update process may render the projector inoperable. After the update is complete, the projector turns off.
8. Press the On button on the remote control or the P power button on the projector.
9. Press the Menu button on the remote control or projector.
10. Select the Settings menu, then Panel Alignment.
11. Select Reset, then Yes to reset the panel alignment.

About Projector Firmware:

Install this firmware package and projectors can benefit from higher image quality, improved performance and stability, various fixed issues encountered throughout the unit’s lifetime, as well as several other changes.

Still, if you wish to apply this release, it would be best if you first read and understand the installations procedure; also, perform this task using a fully-charged battery or in a steady power environment (such as the one ensured by a UPS unit), and only after you have familiarized yourself with the update steps.

Bear in mind that, while the firmware is upgrading, it isn’t recommended to use the projector’s buttons, or interrupt the process in any way; doing so can cause serious malfunctions to the device and might even render it unusable.

That being said, if you intend to update to this release, click the download button, get the package and update the firmware version. If not, check back with our website as often as possible so that you don’t miss the update that will boost the performance of your projector. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Other Drivers