Leica M9 Camera Firmware 1.216 Download

Posted at December 22, 2024 by PCI-DB Team

Leica M9 Camera Firmware 1.216 Description

Changes:

- Thambar-M 90 f/2.2
- Noctilux-M 75 f/1.25 ASPH. 

Firmware Update Procedure:

- Format an SD memory card in your Leica M.
- Turn off the camera and insert the card into an SD card reader – either integrated or connected to your computer. (A reader is required for Firmware updates).
- Download the Firmware file from the Leica M site using the Service & Support/Support/Downloads menu.
- Save the Firmware file at the top level of the card’s folder structure.
- Remove the card properly from your card reader, insert the card into the camera and close the bottom cover.
- Press the “INFO” button and hold it, simultaneously turn on the camera using the main switch.
- The update process takes several 2-4 minutes. “Loading file...” appears on the screen.
- When the update is done, a corresponding message appears on the screen. The Message disappears after some seconds.

CAUTION:

- Please do not turn off your camera, or do not remove the SD Memory Card, do not remove the lens while updating your camera's firmware.
- DOING SO CAN CAUSE A SERIOUS DAMAGE TO YOUR CAMERA!
- When installing the new Firmware version, all user profiles will be deleted and need to be set again after the new firmware is installed. We recommend taking note of the specific settings before updating.
- If the battery does not have sufficient charge, you will see a corresponding warning message.  

About Integrated Web Camera Updates:

Enabling your embedded web camera by installing appropriate software will allow your system to capture and send images through a computer network, and include support for various features that the webcam benefits from.

In addition to that, updating the software on your device can fix various problems that might be encountered during the product's lifetime, and improve existing features like image quality, or add support for new ones.

When it comes to the installation process, the steps are very simple, as each manufacturer tries to make them as easy as possible, so that every user can perform the update on their own – simply run the package and follow the on-screen instructions for a complete installation.

Therefore, if you consider applying this package, hit the download button, and install it on your computer. Moreover, constantly check with our website in order to make sure that you don't miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Leica Drivers