Intel Solid-State Drive Firmware Update Tool 2.1.0 Download

Posted at April 25, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Intel Solid-State Drive Firmware Update Tool 2.1.0
Category	Hdd Ssd Nas Usb Flash
Manufacturer	Intel
File Size	34 MB
Supported OS	Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit ,Windows 8 64 bit ,Windows Linux ,Windows Mac

Intel Solid-State Drive Firmware Update Tool 2.1.0 Description

The new version of the Intel Solid State Drive Toolbox (Intel SSD Toolbox) contains a new firmware update for the Intel Solid State Drive 750 Series products. The latest firmware revision is 8DV10171. The latest bootloader revision is 8B1B0131.

The Intel SSD Toolbox is drive management software that allows you to:
* View current drive information for Intel Solid State Drives (Intel SSDs), including:
- Model number, capacity and firmware version
- Drive health
- Estimated drive life remaining
- SMART attributes (also available for hard disk drives and non-Intel SSDs)
- Identify Device information (also available for hard disk drives and non-Intel SSDs)

* Optimize the performance of an Intel SSD using Trim functionality

* Optimize the performance of an Intel SSD in RAID 0 using Trim functionality Intel Rapid Storage Technology (Intel RST) 11.0 or greater.
NOTE: Trim on RAID 0 is not supported on Windows 8 or Windows Server 2012

* Obtain proactive notifications of new Intel SSD Toolbox software versions for Windows 7 and Windows 8 systems

* Update the firmware on a supported Intel SSDs

* Run quick and full diagnostic scans to test the read and write functionality of an Intel SSD

* Check and tune your system settings for optimal Intel SSD performance, power efficiency, and endurance

* View your system information and hardware configuration, such as central processing unit (CPU), chipset, controller name, and driver versions

* Run Secure Erase on a secondary Intel SSD 

NOTE:

Installing this version of the Intel SSD Toolbox overwrites any previous version of Intel SSD Toolbox installed in your system.

The Intel SSD Toolbox supports the following Intel SSDs:
- Intel Solid State Drive
- Intel Solid State Drive 310 Series
- Intel Solid State Drive 311 Series
- Intel Solid State Drive 320 Series
- Intel Solid State Drive 330 Series
- Intel Solid State Drive 335 Series
- Intel Solid State Drive 510 Series
- Intel Solid State Drive 520 Series
- Intel Solid State Drive 525 Series
- Intel Solid State Drive 530 Series
- Intel Solid State Drive 535 Series
- Intel Solid State Drive 710 Series
- Intel Solid State Drive 730 Series
- Intel Solid State Drive 750 Series
- Intel Solid State Drive Pro 1500 Series
- Intel Solid State Drive Pro 2500 Series
- Intel X18-M / X25-M SATA SSDs (34nm)
- Intel X18-M / X25-M SATA SSDs (50nm)
- Intel X25-E SATA SSDs
- Intel X25-V SATA SSD
- Intel Solid State Drive DC P3500 Series
- Intel Solid State Drive DC P3600 Series
- Intel Solid State Drive DC P3700 Series
- Intel Solid State Drive DC S3500 Series
- Intel Solid State Drive DC S3510 Series
- Intel Solid State Drive DC S3600 Series
- Intel Solid State Drive DC S3610 Series
- Intel Solid State Drive DC S3700 Series
- Intel Solid State Drive DC S3710 Series

About SSD Firmware:

Changing the solid-state drive (SSD) firmware version can bring about a wide variety of changes such as stability improvements for different sleep states, power consumption enhancements, increased read/write speeds, optimized compatibility with various systems, and many others.

However, performing this step is very risky because it can damage the SSD’s software in the event of an update failure. Therefore, make sure you consider changing the firmware only when and if the new version includes changes that you can make use of.

As for the installation method, given the huge number of SSD manufacturers and the wide variety of solid-state drives, it’s recommended that you carefully read and understand the update guide, and initiate the upgrade only when you have completely familiarized yourself with the steps.

In addition to that, most SSD manufacturers also require additional software that will help you apply a new firmware using a specific method – so make sure you have everything you need for a complete and successful upgrade.

Another aspect you should keep in mind is that this task must be performed in a steady power environment, such as the one provided by a UPS unit. Don’t forget to reboot the system so that the newly made changes can take effect.

That being said, if this release includes the changes you need / desire, click the download button and get the firmware file. If not, check with our website constantly in order to find out first when a suitable update becomes available.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers