Sony VPL-VW365ES Projector Firmware 2.301 Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Sony VPL-VW365ES Projector Firmware 2.301
Category	Tv Hdtv Projectors
Manufacturer	Sony
File Size	97.1 MB
Supported OS	OS Independent

Sony VPL-VW365ES Projector Firmware 2.301 Description

This utility installs updates the system software to version 2.301 and provides the following changes and benefits:

Improvements over version 2.205:

- Adds the HDR Contrast function to the Picture Menu (when viewing HDR content) to allow adjustment of the average screen brightness
- Adds automatic selection of BT.2020 color space when receiving such content
- Adds an HDR indicator in the Information Menu when HDR content is being received

Benefits provided by previous updates and included in version 2.301:

- Minor bug fixes
- HDR compatibility for UHD Blu-ray disc media (VPL-VW365ES)
- HDR image quality improvement (VPL-VW665ES)
- New Sony unified control protocol (common protocol/ADCP)
- Picture quality improvements (Reality Creation, etc.)

Update the System Software

CAUTION:During the update process, do not remove the USB device or turn off the projector.

- Power off the projector.
- Make sure no other USB device is connected to the projector before starting the update.
- Insert the USB storage device containing the update folder into USB port of the projector.
- Power on the projector. The update process starts automatically.
Note: During the update the ON/STANDBY indicator blinks green. Then, it blinks amber. It takes about 5 minutes to update.
- After the update is complete, the ON/STANDBY indicator lights up red and the projector enters standby state.
- Power on the projector. 
Note: After the update, the initial power on takes about 15 minutes to light a lamp. During this period, the ON/STANDBY indicator blinks green. DO NOT unplug/power off the projector until the process is finished and the projector lights a lamp.
- The process after the above step varies by model.
VPL-VW365ES: After the ON/STANDBY indicator blinks green for 15 minutes, the projector lights a lamp.

About Projector Firmware:

Install this firmware package and projectors can benefit from higher image quality, improved performance and stability, various fixed issues encountered throughout the unit’s lifetime, as well as several other changes.

Still, if you wish to apply this release, it would be best if you first read and understand the installations procedure; also, perform this task using a fully-charged battery or in a steady power environment (such as the one ensured by a UPS unit), and only after you have familiarized yourself with the update steps.

Bear in mind that, while the firmware is upgrading, it isn’t recommended to use the projector’s buttons, or interrupt the process in any way; doing so can cause serious malfunctions to the device and might even render it unusable.

That being said, if you intend to update to this release, click the download button, get the package and update the firmware version. If not, check back with our website as often as possible so that you don’t miss the update that will boost the performance of your projector.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Sony Drivers