Sony VPL-VW5000ES Projector Firmware 4.301 Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Sony VPL-VW5000ES Projector Firmware 4.301
Category	Tv Hdtv Projectors
Manufacturer	Sony
File Size	98.2 MB
Supported OS	OS Independent

Sony VPL-VW5000ES Projector Firmware 4.301 Description

This utility updates the system software to version 4.301 and provides the following changes and benefits:

Improvements over version 4.203:

- Further improvement of HDR-related functionality:
Adds the HDR Contrast function to the Picture Menu (when viewing HDR content) to allow adjustment of the average screen brightness
Adds automatic selection of BT.2020 color space when receiving such content
Adds an HDR indicator in the Information Menu when HDR content is being received
- Adds Lens Center Return function
- Improves overall picture quality
- Adds minor bug fixes

Benefits provided by previous updates and included in version 4.301:

- Picture quality and noise reduction improvements
- Improved HDR tone mapping
- Improvement for 3D crosstalk
- Support for SNMP

Firmware Installation Instructions

WARNING: Do not power off the projector or disconnect it from the AC power outlet. Doing so may damage the projector to the point of requiring repair.

WARNING:

Do not attempt to operate the projector until the update is complete. Doing so may damage the projector to the point of requiring repair.

IMPORTANT:

Please do not remove the USB storage device until instructed to do so.

- Power off the projector.
- Make sure no other USB device is connected to the projector before starting the update.
- Insert the USB storage device containing the update folder into USB port of the projector.
- Power on the projector. The update process starts automatically.
Note: The ON/STANDBY indicator will blink green and then amber during the update process. The update process takes about 5 minutes to complete.
- Once the update is complete, the ON/STANDBY indicator will light up red, and the projector will enter Standby Mode.
- Remove the USB device.
- Power on the projector. 
Note: After the update, the initial power on takes about 15 minutes to light the laser. During this period, the ON/STANDBY indicator will blink green and the fan will spin at high-speed. Do not power off the projector or disconnect it from the AC power outlet.
- Once the projector completely starts and the laser is lit, the update process is complete.
- Check the current firmware version to confirm that the update has successfully installed. 
Note: If the version number is 4.301, the firmware update was successful.

About Projector Firmware:

Install this firmware package and projectors can benefit from higher image quality, improved performance and stability, various fixed issues encountered throughout the unit’s lifetime, as well as several other changes.

Still, if you wish to apply this release, it would be best if you first read and understand the installations procedure; also, perform this task using a fully-charged battery or in a steady power environment (such as the one ensured by a UPS unit), and only after you have familiarized yourself with the update steps.

Bear in mind that, while the firmware is upgrading, it isn’t recommended to use the projector’s buttons, or interrupt the process in any way; doing so can cause serious malfunctions to the device and might even render it unusable.

That being said, if you intend to update to this release, click the download button, get the package and update the firmware version. If not, check back with our website as often as possible so that you don’t miss the update that will boost the performance of your projector.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Sony Drivers