GoPro HERO6 Black Camera Firmware 01.60 Download

Posted at November 2, 2024 by PCI-DB Team

GoPro HERO6 Black Camera Firmware 01.60 Description

PERFORMANCE IMPROVEMENTS

- Improves camera performance when recording in high frame rates of high resolution mode
- Fixes split screen defect in 2.7k60 Linear FOV and 4k30 Superview FOV
- Reduces image noise in high frame rate and high resolution modes
- Improves image quality in low light environments
- Adjusts color saturation to prevent over-saturation in certain conditions
- Fixes visual defects in 1080p240 during playback on iOS and macOS devices in certain conditions

USABILITY IMPROVEMENTS

- Reduces the time required for media to load on the camera and GoPro app
- Auto Low Light now works with Quikcapture

Installation Instructions:

- Download the UPDATE folder to your computer.
- Insert your camera's microSD card into your computer.
- Right-click on the UPDATE.zip file, click "Extract All".
- You will now see the UPDATE folder you just 'extracted' next to the original UPDATE.zip file you downloaded.
- Now drag the UPDATE folder from your Downloads folder to your microSD Card (Removable Disk). Do not drag the UPDATE.zip file. Do not drag UPDATE folders with numbers added to the end like UPDATE(1), UPDATE(2), etc.
- Safely remove the microSD Card from your computer.
- Power OFF camera manually if it doesn't automatically turn off.
- PRESS the card in firmly using a fingernail until it clicks into place.
- Power your camera ON.
- Your camera will cycle through a number of beeps and turn itself OFF and ON a number of times as it updates.
- Your camera will finally flash an " UPDATING " message before it turns OFF.
- As long as you don't get a " CAMERA UPDATE FAILED " message, your update is successful!

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device's overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera's firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device's performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera's firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn't intended to be destructive, but still, it's best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don't use the camera's buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device's update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product's installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don't miss the update that will boost your camera's performance.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related GoPro Drivers