Mellanox MSB7790-E rev.Ax Switch Firmware 11.0200.0120 Download

Posted at December 3, 2024 by PCI-DB Team

Mellanox MSB7790-E rev.Ax Switch Firmware 11.0200.0120 Description

Changes:

- Reduced typical system power consumption to 136W
- Added support for Adaptive Routing
- Removed forward error correction (FEC) on copper cables of 2m or shorter

Known Issues:

- Congestion control and Port Mirroring features are not supported
- FDR10 speed is not supported.
- Switch LEDs do not blink during boot
- Port LEDs do not flash on system boot.
- Fan LEDs may behave unexpectedly in the first 5 seconds of system boot.
- Link width reduction is not supported in this release.
- EDR links activate forward error correction (FEC) on cables longer than 2m.
- Interoperability If QDR is not enabled for the switch's InfiniBand Port Speed while connected to ConnectX-3/Pro or Connect-IB FDR adapters or to SwitchX / SwitchX-2 FDR switches, links will rise at SDR or DDR (even if FDR is enabled)

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn’t much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn’t either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don’t interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Mellanox Drivers