Gigabyte GA-MA78LM-S2H (rev. 1.1) Realtek LAN Driver 5.792.1208.2011 for XP Download
Posted at November 2, 2024 by PCI-DB Team
Install Driver Automatically Device Name | Gigabyte GA-MA78LM-S2H (rev. 1.1) Realtek LAN Driver 5.792.1208.2011 for XP |
---|
Category | Network Card |
---|
Manufacturer | REALTEK |
---|
File Size | 3.2 MB |
---|
Supported OS | Windows XP ,Windows XP 64 bit |
---|
Gigabyte GA-MA78LM-S2H (rev. 1.1) Realtek LAN Driver 5.792.1208.2011 for XP Description
CPU
- Support for Socket AM3 / AM2+ / AM2 processors: AMD Phenom II processor/ AMD Phenom processor/ AMD Athlon II processor/ AMD Athlon processor/ AMD Sempron processor
Hyper Transport Bus
- 5200/2000 MT/s
Chipset
- North Bridge: AMD 760G
- South Bridge: AMD SB710
Memory
- 2 x 1.8V DDR2 DIMM sockets supporting up to 8 GB of system memory (Note 1)
- Dual channel memory architecture
- Support for DDR2 1200(O.C.) /1066/800 MHz memory modules
- Support for non-ECC memory modules
Onboard Graphics
Integrated in the North Bridge:
- 1 x D-Sub port
- 1 x DVI-D port (Note 2)(Note 3)
- 1 x HDMI port (Note 3)
Audio
- Realtek ALC888B codec
- High Definition Audio
- 2/4/5.1/7.1-channel (Note 4)
- Support for S/PDIF In
- Support for S/PDIF Out
- Support for CD In
LAN
- Realtek 8111D chip (10/100/1000 Mbit)
Expansion Slots
- 1 x PCI Express x16 slot, running at x16
(The PCI Express x16 slot conforms to PCI Express 2.0 standard.)
- 1 x PCI Express x1 slots
- 2 x PCI slots
Storage Interface
South Bridge:
- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
- 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices
- Support for SATA RAID 0, RAID 1, RAID 10 and JBOD
iTE IT8718 chip:
- 1 x floppy disk drive connector supporting up to 1 floppy disk drive
USB
Integrated in the South Bridge
- Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets connected to the internal USB headers)
Internal I/O Connectors
- 1 x 24-pin ATX main power connector
- 1 x 4-pin ATX 12V power connector
- 1 x floppy disk drive connector
- 1 x IDE connector
- 4 x SATA 3Gb/s connectors
- 1 x CPU fan header
- 1 x system fan header
- 1 x front panel header
- 1 x front panel audio header
- 1 x CD In connector
- 1 x S/PDIF In/Out header
- 2 x USB 2.0/1.1 headers
- 1 x serial port header
- 1 x clearing CMOS jumper
Back Panel Connectors
- 1 x PS/2 keyboard or PS/2 mouse port
- 1 x D-Sub port
- 1 x DVI-D port (Note 2) (Note 3)
- 1 x HDMI port (Note 3)
- 8 x USB 2.0/1.1 ports
- 1 x RJ-45 port
- 3 x audio jacks (Line In/Line Out/Microphone)
I/O Controller
- ITE IT8718 chip
H/W Monitoring
System voltage detection
- CPU/System temperature detection
- CPU/System fan speed detection
- CPU overheating warning
- CPU/System fan fail warning
- CPU/System fan speed control (Note 5)
BIOS
- 2 x 8 Mbit flash
- Use of licensed AWARD BIOS
- Support for DualBIOS
- PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features
- Support for @BIOS
- Support for Q-Flash
- Support for Download Center
- Support for Xpress Install
- Support for Xpress Recovery2
- Support for EasyTune (Note 6)
Bundle Software
- Norton Internet Security (OEM version)
Operating System
- Support for Microsoft Windows 7/ Vista/ XP
Form Factor
- Mirco ATX Form Factor; 24.3cm x 22.0 cm
Notes
(Note 1) Due to Windows Vista/XP 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
(Note 2) The DVI-D port does not support D-Sub connection by adapter.
(Note 3) Simultaneous output for DVI-D and HDMI is not supported.
(Note 4) To configure 7.1-channel audio, you need connect with the port of HD Audio standard via front panel and enable the multi-channel audio feature through the audio driver.
(Note 5) Whether the CPU/system fan speed control function is supported will depend on the CPU/ system cooler you install.
(Note 6) Available functions in EasyTune may differ by motherboard model.
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer. It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Related REALTEK Drivers
Device Type: Card Readers File Size: 24.2 MB Windows 7 ,Windows 7 64 bit ,Windows 8.1 ,Windows 8.1 64 bit ,Windows 10 ,Windows 10 64 bit
Install Driver Device Type: Card Readers File Size: 24.2 MB Windows 7 ,Windows 7 64 bit ,Windows 8.1 ,Windows 8.1 64 bit ,Windows 10 ,Windows 10 64 bit
Install Driver Device Type: Card Readers File Size: 24.2 MB Windows 7 ,Windows 7 64 bit ,Windows 8.1 ,Windows 8.1 64 bit ,Windows 10 ,Windows 10 64 bit
Install Driver Device Type: Card Readers File Size: 24.2 MB Windows 7 ,Windows 7 64 bit ,Windows 8.1 ,Windows 8.1 64 bit ,Windows 10 ,Windows 10 64 bit
Install Driver Device Type: Card Readers File Size: 24.2 MB Windows 7 ,Windows 7 64 bit ,Windows 8.1 ,Windows 8.1 64 bit ,Windows 10 ,Windows 10 64 bit
Install Driver Device Type: Card Readers File Size: 24.2 MB Windows 7 ,Windows 7 64 bit ,Windows 8.1 ,Windows 8.1 64 bit ,Windows 10 ,Windows 10 64 bit
Install Driver Device Type: Card Readers File Size: 24.2 MB Windows 7 ,Windows 7 64 bit ,Windows 8.1 ,Windows 8.1 64 bit ,Windows 10 ,Windows 10 64 bit
Install Driver